Corning® PTFE membrane assembly 47 mm bulk pack; find -CLS391847BP MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich
Description General description These are replacement 47 mm PTFE® membranes (20) for the PYREX® Accelerated One-Step Extractor/Concentrator System. Legal Information Corning is a registered trademark of Corning, Inc. PYREX is a registered trademark of Corning, Inc. Teflon is a registered trademark of E. I. du Pont de Nemours and Company
Pore size and membrane type is printed on every syringe filter. Sterile filters are individually blister-wrapped in cases of 50, nonsterile in cases of 50. The 50mm PTFE syringe filter is supplied in case of 12. Compliance. Manufactured to ISO 9002 and GMP standards, and 100% integrity tested.
Feb 22, 2022 · Corning syringe filters PTFE membrane, diam. 50 mm, pore size These Corning syringe filters have polypropylene copolymer housings, hose barb inlets and hose barb outlets. PTFE membranes provide the best chemical resistance; These naturally hydrophobic membranes can be used for venting applications or filtering gases; 100% integrity tested
Corning® Plate Format 24-well Cell Growth Area 0.33 cm² Recommended Medium Well Volume 0.6 mL Recommended Medium Insert Volume 0.1 mL Sterile Yes Membrane Material Polytetrafluoroethylene Membrane Pore Size 0.4 µm Membrane Diameter 12 mm Packaging Format
Mar 02, 2022 · Quality Certificate. These Corning® syringe filters have polypropylene copolymer housings, hose barb inlets and hose barb outlets. PTFE membranes provide the best chemical resistance. These naturally hydrophobic membranes can be used for venting applications or filtering gases. 100% integrity tested, sterile and nonpyrogenic and noncytotoxic.
Feb 22, 2022 · Corning 431227 | 50mm Syringe Filter with PTFE Membrane, Pore Size: 0.2m,, PP Housing, Sterile. This Corning syringe filter has a polypropylene copolymer housing, a hose barb inlet, and a hose barb outlet. The polytetrafluoroethylene (PTFE) membrane provides the best chemical resistance. PTFE is naturally hydrophilic and can be used for venting
These Corning syringe filters have polypropylene copolymer housings, hose barb inlets and hose barb outlets. PTFE membranes provide the best chemical resistance; These naturally hydrophobic membranes can be used for venting applications or filtering gases; 100% integrity tested, sterile and certified nonpyrogenic and noncytotoxic
Feb 22, 2022 · Feb 20, 2022 · ptfe membrane filter manufacturers A complete and scientific modern production model is the assurance of its quality. For improving performance, while the R&D team completes its design, the quality inspection department will strictly check it from the raw material to the shipment process, not allowing the defective one to enter the market.
PTFE membranes makes them very useful for filtering solvents or other aggressive chemi-cals for which other membranes are unsuitable. Because of their hydrophobicity, PTFE membranes must be prewetted with a solvent, such as ethanol, before aqueous solutions can be filtered. Glass fiber filters are used as a depth filter for prefiltration of
These Corning® syringe filters have polypropylene copolymer housings, hose barb inlets and hose barb outlets. PTFE membranes provide the best chemical resistance These naturally hydrophobic membranes can be used for venting applications or filtering gases 100% integrity tested, sterile and nonpyrogenic and noncytotoxic Manufactured in accordance with ISO 9001 standards
Corning® 500 mL Bottle Top Vacuum Filter, 0.22 µm Pore 33.2cm² Polyethersulfone (PES) membranes provide the fastest flow rates, the lowest protein binding and low extractables and are best for filtering cell culture media.
Transwell®-COL Collagen-coated Inserts, PTFE Membrane | Corning Transwell®-COL Collagen-coated Inserts, PTFE Membrane E-mail Print Quality Certificate Permeable supports, also known as cell culture inserts, are an essential tool for the study of both anchorage-dependent and independent cell lines. You can use cell culture inserts to:
The collagen-coated PTFE membrane is fragile and requires careful handling during removal. A wetted cellulosic membrane filter should be placed in direct contact with the underside of the Transwell insert membrane before it is cut out with a scalpel. The wetted, more rigid, cellulosic filter will serve as a support for the collagen-coated membrane.
