Laboratory Chemical Safety Summary (LCSS) Datasheet. Molecular Formula. C8H16O2. Synonyms. Isoamyl propionate. 3-Methylbutyl propanoate. 105-68-0. Isopentyl propionate. ISOAMYL PROPANOATE.
The sodium dodecyl sulfate (SDS) was procured from Sigma-Aldrich. The 18 reagents were used as received. The commercial microporous hydrophobic flat-sheet 19 polytetrafluoroethylene (PTFE) membrane was supplied by Porous Membrane 20
0.20 µm pore size, 25 mm diameter, Millex-LCR hydrophilic PTFE membrane with glass fiber prefilter, domed housing. Millipore. pricing. SLCRM25. 0.45 µm pore size, 25 mm diameter, Millex-LCR hydrophilic PTFE membrane with glass fiber prefilter, domed housing.
This article describes the development of a sub-30 μm thick LDPE-based radiation-grafted anion-exchange membrane (RG-AEM) with high performance characteristics when fully hydrated. This RG-AEM had a OH− anion conductivity of 200 mS cm−1 (80 °C in 100% relative humidity (RH) environments), which led to a H2/O Recent Open Access Articles
found use in liquid−liquid extraction,1 ion-selective electrodes (ISE),2 pharmaceutical research as mimics of biological membranes,3 and the partitioning of actinides.4 Some of the SLM applications include use of an electrical field to modulate the membrane’s5
To prepare the QPPO polymer solution, 15.4 g of PPO was dissolved in 80 mL mono-chlorobenzene for 1 h at room temperature, using a mechanical stirrer with a condenser; this was carried out in a three-neck round flask. Afterward, zinc chloride (0.77 g) was added
2012/2/1 · The resulting composite membrane has (1) proton conducting properties, (2) thermal stability limited by PTFE (260 °C) and (3) mechanical support for the ZrP particles, provided by the PTFE. It was anticipated that this composite ZrP–PTFE membrane would be particularly suitable for direct hydrocarbon fuel cells.
Aervent cartridges have a 0.2µ PTFE membrane and are used in pharmaceutical applications where it is critical to use a phobic filter that has proven bacterial and viral retention capabilities. Common applications for Aervent are fermentation air applications,
2020/12/9 · purchased from Sigma Aldrich (Subang, Malaysia). The membrane module was manufactured in the Dalian Institute of Chemical Physics (China), where PTFE hollow fibers were used. The detailed information on PTFE hollow fibers and membrane module is
Product Description. Because of their hydrophobic nature, the polypropylene membranes are best suited for industrial processes such as gas filtration, chemical processes and photo-resist production as well as for application in the automotive industry. Since polypropylene is a pure hydrocarbon material, there are no disposal problems relating to
Filter filtration is a common method for preparing and sterilizing biological samples to remove impurities and micro-organisms. However, using syringe filters could cause loss of significant amounts of biological materials due to unwanted protein binding with the
2015/6/1 · The studied membranes were coated using initiated chemical vapor deposition (iCVD) with the same hydrophobic monomer, 1H, 1H, 2 H, 2H-perfluorooctyl acrylate (C6PFA, Sigma-Aldrich, 97%). iCVD of p(C6PFA) was conducted in a custom-built reactor using.