Flow range 80 to 800 mL/min—flow rate depends on drive rpm and tubing size. PTFE wetted parts help maintain fluid purity. Pump through filters or into pressurized system. Check valve on inlet side of pump holds prime for up to two hours when pump is off. Unique geometry minimizes fluid churning and dead volume for high metering accuracy without
long life, even during continuous use in hot air up to 60 C, in vent applications up to 80 C and during repeated steaming. This is combined with high flow rates and excellent de-wetting characteristics resulting in very economical filtration through the use ofμm
2020/2/25 · Material (Filter) Hydrophilic PTFE Porosity (%) 80 TGK Product Number 719-41-90-13 AS ONE Part Number 2-3051-14 Diameter (phi mm) 25 Type Screen filter Thickness (microm) 80 Hole Diameter (phi micro m) 0.45 Surface Solid color Filtration Flow Rate
Max Flow Rate (mL/min/sq cm) 60. Description Fluoropore Membrane, PTFE, 0.50 µm, 47 mm dia. Key Features. Fluoropore PTFE (polytetrafluoroethylene) is ideal for filtration of non-aqueous solutions. View Virtual Catalog - English.
Filtration fabrics constructed of PTFE have traditionally been used in industrial applications because of the high thermal and chemical resistance of PTFE fibers. Common applications include waste incineration, lead smelting, carbon black, titanium dioxide, and
Foxx’s EZFlow PES Membrane Disc Filters are ideal for use in a wide variety of aqueous filtration applications. Constructed from Foxx’s low-protein-binding, low-extractable hydrophilic polyethersulfone, these filters provide super-fast flow rates and high throughput when filtering media, buffers, and other filtrates common to microbiological and life science applications.
The combination of hydrophobicity and high-efficiency filtration found in GORE® Turbine Filters is key to protecting the turbine. E10 HEPA filters only block 85% of the particles known to cause compressor fouling, allowing 15% to enter the turbine — significantly reducing compressor efficiency.
2018/8/7 · Cellulose Nitrate (CN) Membrane. Hydrophilic membrane with limited resistance to organic solvents, but is strong and flexible, with a high flow rate. Cellulose nitrate is compatible with some solvents that cellulose acetate is not. DO USE: for acetic acid, carbon tetrachloride, chloroform, cresol, and …
PTFE membrane - 130 C (266 F) at 1.0 bar (100 kPa, 15 psi) Emflon II membrane - 60 C (140 F) at 1.0 bar (100 kPa, 15 psi) Maximum Operating Pressure 4.1 bar (410 kPa, 60 psi) at ambient temperature Minimum Bubble Point (IPA, 100%) PTFE membrane
Overview. Fluoropore™ Membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support. (Catalogue numbers containing ""FHUP"" have no backing.) Fluoropore™ Membranes provide broad chemical compatibility, high flow …
