※加入會員,有優惠價哦※ 詳細規格說明 廠牌:ADVANTEC 濾膜孔徑0.1um~1.0um 熱穩定:可121 高壓滅菌及130 以下之溫度使用 溶劑疏水性,如欲過濾水溶液,請先以Methnol,Actone 或低粘度(<0.6cp)之液體潤濕過濾膜 直徑
Filter Membrane 0.45 found in: Filter Membrane PTFE 0.45um, Filter PTFE Membrane 0.45um Pk5, Filter membrane Nylon 47mm 0.45um 100/pk, Filter membrane PTFE.. diameters and improves stability Polyethersulfone (PES) membrane for high flow and low binding Two membrane pore sizes: 0.22µm or 0.45µm Filter systems include bottle top filter and solution bottle with cap Bottle top filters fit
PTFE membrane is hydrophobic and not for use with liquids with a surface tension ≥ 32mN. Prewetting the membrane with isopropyl alcohol or ethyl alcohol will allow filtration of aqueous solutions. The plastic cartridge housing can degrade over time,
Buy Advantec J100A047A PTFE Hydrophobic Membranes with Support; 47 mm dia; 1.00 µm; 100/PK and more from our comprehensive selection of Advantec Hydrophobic PTFE Membranes with Support A laminated polypropylene support offers improved handling
Hydrophobic PTFE Membrane Filters ต วกรองเมมเบรน Use to sterilize gasses, vent gas from aqueous solutions, or sterilize or clarify aggressive chemicals Applications Sterilize gases: traps aqueous aerosols Air ans gas venting: allows gases to pass freely while
Sterlitech’s comprehensive range of membrane, syringe, and capsule filters are exclusively selected to represent the industry’s highest quality manufacturing standards, product performance, and application support for laboratory-scale filtration.
Buy Advantec strong good resistance membrane filters of Hydrophilic PTFE, Sterile, Cellulose Acetate, Borosilicate Glass Fiber online at firstsourcels.com Membrane filtration finds a wide range of use in microbiological lab analysis and experiments. A variety of
Buy Advantec H050A047A PTFE Hydrophilic Membranes; 47 mm dia; 0.50 µm; 100/PK and more from our comprehensive selection of Advantec PTFE Hydrophilic Membranes Hydrophilic PTFE membranes offer maximum chemical and pH resistance with minimal
Description Unsupported Hydrophobic PTFE Membranes, 0.5 um, 47 mm; 100/Pk More About this Item This thin, highly porous PTFE membrane is inert to most chemically aggressive solvents, strong acids, and bases that may be incompatible with supported PTFE filters.