25mm 0.45um PTFE Syringe Filter for Gas Exchange Trading Whatman® 6785-2504 Syringe Filter, 25mm, Puradisc, 0.45um Science Supply Store offers Lab Supplies and Equipment, ECO Funnels, Nalgene Lab Bottles, Pharmacy Vials and Containers, Safety Storage Cabinets and Safety Cans
Non-Sterile Syringe Filters – PTFE syringe filters housing is made of premium polypropylene(PP) material with a unique threaded interface (Luer lock) design, non-sterile, no adhesive, and no contamination of the sample. It can be autoclaved and sterilized at 121°C/249.8℉ for 30 minutes. Sample: Free Payment: 100% T/T in advance
Polyethersulfone (PES) membrane for high flow and low binding Two membrane pore sizes: 0.22µm or 0.45µm Filter systems include bottle top filter and solution bottle with cap Bottle top filters fit standard 45mm threaded solution storage bottles Packaged sterile (gamma irradiated) in bags. Related Products: 0.22 Pes.
13 mm Acrodisc syringe filters are designed for the filtration of sample volumes up to 10 mL. They feature an effective filtration area of 1.0 cm 2 and a polypropylene housing which has excellent chemical compatibility properties. The syringe filters are HPLC certified for low levels of UV-absorbing extractables, preventing spurious peaks on
Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications. Whether your research necessitates prefiltration, sample preparation, sterile filtration, laboratory filtration, or gas venting, Nalgene syringe filters are lab essentials. Key Features. 10 to 100mL
25mm 0.45um PTFE Syringe Filter for Gas Exchange Pharmassure Shroom Supply Syringe Filter - 0.22 μm - PTFE Sizes: 13 mm & 25 mm - Available in both 13mm and 25mm diameters. These autoclavable 0.22 µm micron syringe filters are made out of a hydrophobic PTFE and are 100% reusable.
Bubble Point & Air Flow Rate (PTFE 0.22 μm, 0.01 μm for air & gas) Bubble Point: ≥ 900 mbar with 60/40% IPA/water Air Flow Rate: ≥ 25 L/min at 1 bar: Maximum Operating Pressure: Forward: 3.5 bar @ 23℃ and 3.0 bar @ 60℃ for liquid; 3.0 bar @ 23℃ and 2.5 bar @ 60℃ for air & gas. Bacterial Retention (for 0.22 μm PES/PTFE )
These Corning syringe filters have polypropylene copolymer housings, female luer lock inlets and male luer slip outlets. Nylon (NY) membranes are naturally hydrophilic, surfactant-free and offer the lowest extractables. 100% integrity tested, sterile and certified nonpyrogenic and noncytotoxic. Manufactured in accordance with ISO 9002 standards.
Labfil Sterile 0.45um Micron PTFE Hydrophilic Lab Syringe Filters Adopts Original Imported Products, Especially For Gas With Analysis Of The Pretreatment System Development, To Protect The Analyzer. Scientific And Reasonable Gas Circuit, With A Nice Design Appearance. Send Inquiry Chat Now
50mm 0.45um Hydrophobic PTFE air Vent Filter for Vacuum Pump 50MM PTFE INLET SYRINGE FILTER: 50mm 0.22um or 0.45um PTFE Inlet Syringe Filters, Hydrophobic PTFE membrane is laminated with polypropylene. 50MM PTFE MAIN APPLICATION: Naturally hydrophobic PTFE membrane provides the best chemical resistance, and can be used forventing applications or filtering gases , individually wrapped filters.
Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm PerkinElmer Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.
Syringe Filter, PTFE, 0.45µm, 13mm Diameter Denville for easy recognition. The 30mm syringe filters can filter up to 100mL of sample with a retention volume of less than 100µL. The 13mm filters can filter 5 to 10mL of sample and have a retention volume of only 28µL.
Shop IW Tremont Co Inc Sterile PTFE Syringe Filters, 0.45um, 13mm, Hydrophobic, 100 pack at Fishersci.com IW Tremont Co Inc Sterile PTFE Syringe Filters, 0.45um, 13mm, Hydrophobic, | Fisher Scientific
$142.50 - $1319.00 Description Low hold-up volume helps you to recover virtually all of your sample after filtering Tested for 100% membrane and housing integrity, eliminating concerns about fluid loss Individually wrapped Hydrophilic PVDF Membrane Hydrophilic membrane binds far less protein than nitrocellulose, nylon or PTFE
Aug 24, 2017 · Hydrophobic PTFE membrane has wide chemical compatibility, excellent corrosion resistance, high rejection, high flow, and can be sterilized in various ways. It can be widely used in fermentation air sterilization filtration, gas and organic solvent removal by particle filtration. APPLICATIONS: 1.Fermentation air sterilization filtration,