standard grade ptfe 0.45 micron filter for petrochemicals

Product Description. Applications: One of the major applications for the PTFE membrane is the clarification of corrosives, solvents, and aggressive fluids. This includes the important requirement in HPLC analysis for sample filtration where any solid particles can cause permanent damage to the column. The 0.5 μm pore size is normally used.

MICROCONTAMINATION CONTROL Fluorogard® All-PTFE High-Retention Filters All-PTFE filtration solutions for advanced WEC processes ensure broad chemical compatibility, high flow, and superior cleanliness Fluorogard®

0.2,0.45,1,5,10 micron Our PTFE membrane cartridge filter is manufactured by the precise and quality process, applicable to the gas, air, chemical filtering of the microchip LCD manufacturing process of high tech industry, the manufacturing process of food and pharmaceutical intermediates.

Titan3 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 30 mm, with Pre-Filter, 100 Pk. Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Titan3 PTFE (Hydrophobic) Syringe Filter 0.45 µm, 4 mm, 100 Pk.

Catalog number: CH2225-NP. Use Thermo Scientific™ Choice™ PTFE Hydrophobic Syringe Filters for filtration of aggressive organic, highly basic or hot solutions and as transducer protectors. They can filter aqueous solutions after pre-wetting with an alcohol. These syringe filters provide cleaner sample extracts by removing interfering

Compare. Product No. Description. Pricing. AG4502550. This is a 25 mm Hydrophilic Pure Silver membrane filter with a 0.45 um ( 0.45 micron filter ) pore size. Used for air

2022年1月25日 · These filters are available in two pore sizes – 0.22 and 0.45µm, and are available in three different syringe filter sizes – 13, 25 and 33mm. The PP filters with a 0.22µm pore size have a water flow of 23ml/min/cm 2 and a bubble point of 340kPa. The 0.45µm pore size filters have a water flow of 46ml/min/cm 2 and a bubble point of 220kPa.

high flow rate ptfe 0.22 micron filter for petrochemicals PTFE Syringe Filters - Polytetrafluoroethylene Syringe Filters We have Best quality of PTFE syringe filters available ex stock in all sizes and micron sizes are 13mm, 25 mm, micron rating : 0.22, 0.45 micron also available in 50 mm disc for Vent filter applications

4423 Acrodisc CR PTFE, 0.2 µm, 13 mm 100/300 4553 Acrodisc CR PTFE Minispike, 0.45 µm, 13 mm 100/300 4422 Acrodisc CR PTFE, 0.45 µm, 13 mm 100/300 4225 Acrodisc CR PTFE, 0.2 µm, 25 mm 50/200 4219 Acrodisc

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity. Unlike hydrophilic filter types, they are not wetted by air humidity.

luer lock filter pp hplc syringe filter manufacturer Oct 11, 2021 · Porex 0.22 um ptfe syringe filter for sterilization-Voa Whatman Puradisc 25 mm PTFE Syringe Filters, 0.2 µm, 10

(Cellulose Nitrate with 0.2 µm, 0.45 µm and 0.8 µm pore sizes). CN is the standard membrane for general filtration of buffers and solutions. Nalgene CN is Triton®-free. It is fast flowing but has high protein binding and higherNylon.

Critical Process Filtration, Inc. 4 D Flow Rates for ETM/HA Capsules by Pore Size 0.3 Flow rates for Capsule filters are tested using a 2” capsule filter with 1” sanitary inlet and outlet ports. The test fluid is water or compressed

Description. Pricing. FWMS01800. This is a 18 mm Hydrophobic PTFE Membrane Filter with a 0.45 micron pore size. For use in Sterilizing filtration, bioassays, solvent filtration.