South Africa ptfe 0.45 micron filter for sterilization

Poly-Fluoro membrane pleated filter is made of polytetrafluoroethylene (PTFE) which is characterized by high chemical inertness. The Poly- Fluoro pleated filter cartridge is widely use for filtering the strong acid and base solutions that are used in wet etching, solvent striping, and cleaning manufacturing processes of semiconductor factory.

One of the major applications for the PTFE filter is the clarification of corrosives, solvents and aggressive fluids. The 0.45µm pore size is normally used. Membrane filter OD=90MM,0.45 micron,made by PTFE,50pcs/LOT | eBay

Sartopore 2 filter elements feature a unique hydrophilic hetero-geneous double layer design of a 0.45 μm pre-filter and 0.2 μm final filter membrane with an exceptionally high throughput and flow-rate. In addition to its outstanding performance, the Poly-ethersulfone membrane gives Sartopore ® 2 0.2 μm broad chemical

The membrane is available in a 0.45 µm retention rating filtration of viscous fluids and prefiltration, 0.2 µm rated for sterilization, and 0.1 µm rated for sterilization and mycoplasma removal.

These products boast high quality construction, with low hold-up volumes. Labotec Syringe Filters are available in FS or WS options. The FS range is available in materials including Nylon, Hydrophobic and Hydrophilic PTFE, PES, PVDF, MCE, CA, GF, PP and Active Carbon. Sterile options can be arranged!

• High porosity for increased flow rates without compromising filter integrity • Use for many standard laboratory applications, including filter sterilization, contamination analysis • All lots of 0.45m filters are tested for retention of coliform, fecal streptococci, and Serratia marcescens

TETPOR LIQUID filters are particularly suitable for sterilization and particulate removal from aggressive chemicals (including acids, bases and solvents) within a wide range of critical processing industries.

Innapropriate filter size will can cause a filter to plug prematurely. Filter pore size is chosen based on the application. If the application requires a sterile fluid, than a 0.22 micron membrane would be used for standard solutions that have bacterial bioburden. A 0.1 micron filter would be used for applications where mycoplasma is a concern.

The pre-filters are suitable for the separation of particles and larger micro-organisms such as yeasts and moulds. Sartorius offers solutions for prefiltration and depth filtration in many different pore sizes. Protect your depth filters by using pre-filters in clarification and sterile filtration. If you have any further questions about the

PerkinElmer. Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are.

Home » News » 0.22um PTFE Filter » South Africa ptfe membrane filter 0.2um for hplc. South Africa ptfe membrane filter 0.2um for hplc

Home » News » 0.45um PTFE Filter » Millipore 0.45um ptfe syringe filter for sterilization. Product Category 1-4mL Autosampler Vials for HPLC, UPLC, GC. 16mm, 25mm

Millex Syringe Filter, Fluoropore™ PTFE, Hydrophobic, Non-sterile 0.45 µm pore size, 25 mm diameter, Millex-FH hydrophobic PTFE membrane - Find MSDS or SDS, a COA, data sheets and more information.

47mm,0.45 Micron,Lab PTFE Membrane Filter,Outer Diameter 47mm,50Pieces/pack $ Thorough cleaning and sterilization(if necessary) are recommended before use. In the ...

Sterilization Temperature – 100 times, 30 min Specification Media – PTFE , Support layer & Cage - PP Seal material – Silicone, EPDM, NBR, VITON, Teflon 0.1, 0.22, 0.45 micron ( for Liquid ) 0.01 , 0.02 micron ( for gases ) 80 deg C cycles at 121 deg C UNIVERSAL FILTRATION FILTER CARTRIDGE DATASHEET 1 Features Hydrophobic PTFE Membrane media