solvent compatibility ptfe membrane filter 0.45um for laboratory vacuum filter system

Hydrophobic PTFE Membrane Filtration 13mm/ 25mm/ 47mm/ 50mm/ 90mm Diameter 0.22um/ 0.45um Pore Size Industrial Filtrations by Allpure Biotechnology DESCRIPTION:Â With natural hydrophobicity and excellent chemical resistance, PTFE membrane filters are ideal for aseptic exhaust of non-aqueous solvents, acids and corrosive liquids, and which is

PTFE membrane filters have an excellent chemical compatibility (pH 1 to 14), so that they are also used for the filtration of solvents and acids, to which other filter types are not resistant. Moreover they can be used to filter aqueous solutions as well, but because of their hydrophobic characteristics, they must be pre-wetted with ethanol or

Choose a filter or membrane based on: 1) Chemical compatibility of the membrane and housing with your sample matrix. 2) Size and amount of particulates in the sample. 3) Potential interactions (binding) between the membrane and sample components. 4) Special considerations such as requirement for prefilter or inorganic ion certification.

Nylon membrane disc filters: 0.45 µm pore-size, 47 mm diameter, pack of 100. Hydrophilic, low-extractable, inert, durable material supported by an internal polyester web. Typically used for HPLC, microbiology, medical/clinical, and general filtration.

Thomas Scientific 325-1451-TMS1 Solvent Filtration Disposable Vacuum Bottle Top Filter, 0.45um PTFE Membrane, 500mL, GL45 Thread: Amazon.com: Industrial & Scientific

Product Number. Product Description. AG4502550. This is a 25 mm Hydrophilic Pure Silver membrane filter with a 0.45 um ( 0.45 micron filter ) pore size. Used for air monitoring of carbon black, coal tar products, coke oven emissions & silica. Referenced by NIOSH for collecting airborne contaminants.

Example:Filter needed for the apparatus fitting diameter size of 13mm Particle size (0.45um) , chemical compatibility (using Acid), and the membrane needed (hydrophilic) You will be able to find for example :PTFE Membrane filter with 0.45um pore diameter of 13mm [Request Filter Consumables Samples and appointment] Types of Membrane Materials

.45um Whatman’s range of membrane filters with advanced technical specifications are the preferred choice for a wide range of applications. The membrane filters offer accurately controlled pore size distribution and higher strength and flexibility, which ensure reproducibility and consistency.

Nylon and PTFE (Teflon) membranes have broad chemical compatibility and can be used to filter most HPLC and GC fluids/solvents. PTFE can also be used to filter air or gases. Nylon is good for DMSO. PES and CA/SFCA membranes are compatible with non-alcoholic aqueous solutions and

Jin Teng Laboratory Pvdf Syringe Filter 13mm* 0.2/0.45ptfe Disposable Membrane Filter , Find Complete Details about Jin Teng Laboratory Pvdf Syringe Filter 13mm* 0.2/0.45ptfe Disposable Membrane Filter,Laboratory Pvdf Ptfe Syringe Filter 13mm*0.2/0.45,Disposable Pvdf Ptfe Membrane Filter 13mm*0.2/0.45,Pvdf Ptfesyringe Filter 13mm*0.2/0.45 from Other Lab Supplies Supplier or Manufacturer

PerkinElmer. Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are.

microorganisms by surface capture. The membrane disc filters are available in 0.22µm or 0.45µm pore sizes. The Hydrophobic PTFE membrane is bonded to a polypropylene support and due to its extreme chemical compatibility, they are ideal for the filtration of solvents and acids or other aggressive

42 mm vacuum system/square 13.6 100-500 49.5 mm vacuum system/square 19.6 200-750 63 mm vacuum system/square 33.2 300-1500 79 mm vacuum system/square 54.5 500-3000 *These values assume an aqueous solution and a 0.2 micron membrane. Solutions containing sera or other proteinaceous materials will be at the lower end of the range.

PTFE Syringe Filters stand up to the most aggressive solvent, acid, and base samples and are ideal for filtration of highly aggressive colloidal solutions. These filters can be used under extreme chemical or temperature conditions and are ideal for analytical and research applications where non-aqueous/organic solvent filtration is required.

Millex® hydrophilic PTFE syringe filters boast broad chemical compatibility and are HPLC-certified, guaranteeing low extractables. With their robust performance, these filters can be used for a variety of samples without the risk of membrane failure or sample contamination.