solvent compatibility 0.45um ptfe syringe filter distributor

These syringe filters are available with different hydrophilic media like Nylon, Cellulose acetate (CA), PVDF, PES and PTFE (hydrophobic) in pore rating of 0.2 µm and 0.45µm with size of 4mm, 13mm, 25mm and 33mm. Omicron Quality lab is 100% responsible for the various tests of syringe filters, membrane filters and, their criteria starts from

Hydrophobic PTFE syringe filters have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are color-coded and available in smooth rim or gear rim formats.

CHROMAFIL® Syringe Filters - Teflon (PTFE) Polytetrafluorethylene Hydrophobic membranes For nonpolar liquids and gases Extremely resistant towards all kinds of solvents as well as with strong acids or bases This membrane can be made more hydrophilic by first pre-wetting with alcohol followed by flushing with water .tg {border-collapse:collapse;border-spacing:0;margin:0px

ACROPREPADV 2ML 0.45UM wwPTFE 5/PK - ACROPREPADV 2ML 0.45UM wwPTFE 5/PK 1. Free Ground Shipping (Shipping Discount) is applied to selected products only. 2. This discount expires on the 31 st December 2020. 3. This discount applies to

4 mm Puradisc Syringe Filters Membrane Nonsterile without tube tip Nonsterile with tube tip Sterile without tube tip Nylon PVDF PTFE PVDF Nylon PVDF Quantity/pack Pore size (µm) 0.2 6777-0402 6786-0402 6791-0402 50 0.45 6777

Captiva syringe filters are typically used to prepare small-volume samples for HPLC and ion chromatography. They allow for high flowrates and loading volumes, and also extend column lifetimes considerably. Find out more here.

26 列 · 19/11/2018 · 0.45um 100 Pcs. NXSFPTFE1322-1 PTFE Hydrophobic 13mm 0.22um 100 Pcs.

Millex Syringe Filter, Fluoropore® PTFE, Hydrophobic, Non-sterile 0.45 µm pore size, 4 mm diameter, Millex-FH hydrophobic PTFE membrane; find Millipore-SLFHR04NL MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma

Syringe Filters, Syrfi Syringe Filters, 13MM 0.45UM PTFE HYDROPHOBIC, 100/pk The PTFE (hydrophobic) membrane is recommended for elevated temperatures and most organic solvents, caustic, and acidic solutions. NOTE: requires pre-wetting with an alcohol

Buy Cole-Parmer Syringe Filter, 25 mm, 0.45 um Nylon; 100/Pk and more from our comprehensive selection of Syringe Filters, Non-Sterile Reduce bursting with reinforced polypropylene housing Take advantage of a large effective filtration area Standard female luer

Syringe and Syringeless Filters Water Testing and Environmental Analysis Tubes & Vials Tubes and Vials Centrifuge Tubes Microcentrifuge Tubes PCR Tubes Test Tubes Tube Racks and Storage Autosampler Vials, Caps, and Closures

Vials, LC, 0.45uM eXtreme PTFE Filter, 12x32mm with Pre-Slit Septa, 100/pk The eXtreme PTFE filter vial has a patented design for easy compression and complete sample filtration. It offers multi-layer filtration for viscous samples, and samples with up to 30%

Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17576 with a pore size of 0.45 µm can be used for sample preparation. All materials of this filter element meet the requirements of the

Syringe filters. Filters Syringe Filters. Available with either PP, PTFE or nylon membrane. Membranes are available in either 0,2 or 0,45 µm pore size, with the choice often made on analytical column packing size. If the column packing size is larger than 3 μm then use 0,45 μm, and if 3 μm or smaller then use 0

Clear PTFE (Hydrophobic) Syringe Filters, 0.45 μm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.