solvent compatibility 0.45um ptfe filter Teffil

Whatman 6720-5045, Polydisc TF Filter, polypropylene, 0.45 um (10 pcs) Whatman product code. 6720-5045. Filter Media. PTFE. Particle Retention Rate. 45um. Diameter or Size L X W. 11.02 x 2.76.

AcroPrep Advance Filter Plates for Solvent Filtration - 2 mL, 0.45 µm PTFE membrane (5/pkg)

PerkinElmer. Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The

The 0.45uM membrane is ideal for standard HPLC systems with 0,3mm ID tubing to remove sample particulates and prolong the life of system components such as the autosampler needle, injection port and valve, and column inlet tubing.

Able to filter solutions at temperatures up to 100°C. Convenient and easy to use. Color coding makes it easy to select the correct membrane and pore size. Packed in re-usable rigid transparent color-coded containers. Syringe filters can be sterilized by autoclave at 125°C for 15 minutes.

Porosities: 0.20 µm, 0.45 µm Autoclave: Sterilize by dry heat at 121 C for 15 minutes Pre-filter (if fitted): GMF 1 µm Applications • HPLC and organic solvent sample preparation and clean up • Dissolution sample analysis, especially high-binding tablets or

Polyethersulfone (PES) Membrane Filters, 0.45 Micron, 13mm, 100/Pk. Sterlitech PES (polyethersulfone) membrane filters, 0.45 micron pore size, 13 mm diameter, pack of 100. Hydrophilic, low protein/drug binding, minimal extractables, and broad chemical tolerance; ideal for pharmaceutical, medical, and life science applications.

Solvent Filtration Disposable Vacuum Bottle Top Filter, 0.45um PTFE Membrane for Clarification and Prefiltration, 500mL, GL45 Thread, Polypropylene Housing, Non-Sterile: Amazon.com: Industrial & Scientific Hello Select your address

17/2/2020 · PTFE Hydrophilic Syringe Filters 0.2 or 0.45um Resisting nearly all corrosive chemicals makes PTFE syringe filters an ideal choice. However, natural hydrophobic PTFE has it’s disadvantages not letting aqueous solutions passing through while many of these chemicals are diluted with water.

15 mm PTFE PP 0.45 μm Male Luer Slip White, Printed No 500 17574-----Q 4 mm PTFE PP 0.2 μm Male Luer Slip Blue Tray No 500 17844-----Q 4 mm PTFE PP 0.45 μm Male Luer Slip Yellow Tray No 50 1 -----K 4 mm PTFE PP

The hydrophobic characteristics of the ePTFE membrane makes the Fluorofil filter cartridge particularly suitable for wet gas sterilising applications, such as fermenter air feed. For solvent and aggressive chemical filtration applications, Fluorofil™ cartridges offer a wide range of chemical compatibility with high thermal stability.

Millex Syringe Filter, Hydrophilic PTFE, Non-sterile 0.45 µm pore size, 4 mm diameter, Millex-LH hydrophilic PTFE membrane; find Millipore-SLLHR04NL MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich

Vials, LC, 0.45uM eXtreme PTFE Filter, 12x32mm with Pre-Slit Septa, 100/pk The eXtreme PTFE filter vial has a patented design for easy compression and complete sample filtration. It offers multi-layer filtration for viscous samples, and samples with up to 30%

Hydrophobic PTFE syringe filters have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure

PTFE Membrane - 0.45µm Pore Size - Hydrophobic - 500ml Capacity Disposable Bottle Top Filter-Degassing Unit for HPLC solvents saves time while producing excellent results. SOLVFil™ 500 is constructed as a disposable, single piece filtration device from high purity FDA grade polypropylene which eliminates solvent leaking and spills with virtually no extractables and chemically inert.