Restek ptfe membrane filter 0.45um for glass products

The support base has a coarse-porosity glass frit and an integral vacuum connection, located above the drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus includes a funnel, an anodized aluminum clamp, a 47 mm fritted glass support base, and a filtration flask.

Ultra-low dead volume allows you to filter as little as 10 μL of sample and still obtain enough filtrate to make a 2 μL injection. Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon.

Membrane filters serve as effective physical barriers that remove solids, viruses, bacteria, and other unwanted molecules. Specialized types are designed for softening, disinfecting, organic removal processing, and water desalination. The filters can be installed in compact, automated, or modular units. These strainers can be used as separators between stacked discs in a single filter holder

Thomson SINGLE StEP Standard Filter Vials, PTFE, 0.45um, 100pk (25894)

Milliseal Membrane Seal, PTFE, 18 mm This is a 18 mm Hydrophobic PTFE Membrane Filter with a 0.45 micron pore size. For use in Sterilizing filtration, bioassays, solvent filtration. pricing

Finneran 13mm Mini-Tip Syringe Filters provide extremely low dead volume of less than 10ul, and are available in 0.2um and 0.45um pore sizes. Autoclavable. Autoclavable. Related Products: Syringe Filter 0.2

The filters can be installed in compact, automated, or modular units. These strainers can be used as separators between stacked discs in a single filter holder during serial filtration. Membrane filters are virtually inert to chemical and biological agents, ensuring stability when filtering concentrated acids, alkalis, or oxidizers.

MS PTFE membrane media for filtration is made of PTFE(polytetrafluoroethylene), and were drawn 2-demension. It is micro-pore film. The PTFE membrane was laminated with s great variety of fabric and paper. They are new filter media.

Syringe Filter(PTFE) A syringe filter (sometimes called a wheel filter if it has a wheel-like shape) is a single-use filter cartridge. It is attached to the end of a syringe for use. Syringe filters may have Luer lock fittings, though not universally so.

Filter Vials 0.45um PTFE with low evaporation cap 100-pk., Thomson SINGLE StEP, Blue Cap: 100-- Add to Cart: RK25873 Filter Vials 0.45um PVDF with low evaporation cap 100-pk., Thomson SINGLE StEP Yellow Cap: 100-- Add to Cart

Membrane CA GFP PTFE Syringe Filters, 0.45um, 17mm, 100/pk $120.00 ... Get the latest updates on new products and upcoming sales.

Syringe Filters with Luer Lock Inlet cat.# 23972 Luer lock inlet offers leak-tight syringe connection. Variety of filter types, porosities, and diameters. Color

The addition of PTFE membrane to standard filter fabrics will on average lower initial permeability from 30-60 CFM to 5-15CFM (depending on the fabric substrate and type of PTFE membrane). Under normal conditions Baghouse.com PTFE membrane filters will operate at 0.5in pressure drop at a 6:1 air-to-cloth ratio.

Syringe filters are ideal for filtering the sample solution before injection. These are usually membrane filters made of appropriate materials. They are also available as glass fibre filters or as membrane filters with glass fibre pre-filters in cases where a glass fibre filter is required in front of the membrane filter.

Select an optimal configuration from the variety of filter configurations from Whatman for cellulose and glass filters. Whatever you need to filter, Whatman has it covered. GE Whatman Laboratory Filtration Guide (1.1 MB)