Compare. Product No. Description. Pricing. AG4502550. This is a 25 mm Hydrophilic Pure Silver membrane filter with a 0.45 um ( 0.45 micron filter ) pore size. Used for air monitoring of carbon black, coal tar products, coke oven emissions & silica. Referenced by NIOSH for collecting airborne contaminants. Expand.
Not sure which Restek product is the best for your analysis? Consult a Technical Specialist Catalog # Clear All 24654 WISP 48 Step Vial Clear 15 x 45 mm 13-425 Screw-Thread 4.0 mL 100-pk.
Restek - 23985 - 30 mm Syringe Filter, 0.45 µm, PTFE Luer lock inlet offers leak-tight syringe connection. Variety of filter types, porosities, and diameters. Color coded for easy identification. Rugged polypropylene housing
MILLEX ®-LCR Syringe Filter, 0.45 μm Hydrophilic PTFE, 33 mm, Nonsterile Pore size 0.45 μm pore size Expand View Pricing SLFG050 Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm, A 50 mm diameter non-sterile syringe 0.2
Outer Diameter: 25mm Pore Size: 0.22um Media Material: PTFE Product Name: Sterile Syringe Filters Hole Diameter: 0.22um, 0.45um Usage: Filtration Tool in Laboratory
EZFlow 25mm, 47mm, and 90mm membrane disc filters are used to retain particles or microorganisms by surface capture. The membrane disc filters are available in 0.22µm or 0.45µm pore sizes. The Hydrophobic PTFE membrane is bonded to a polypropylene support and due to its extreme chemical. Related Products: Membrane Filter 47mm.
Choice™ PTFE (Hydrophilic) Syringe Filters. Use Thermo Scientific™ Choice™ PTFE Hydrophilic Syringe Filters for filtration of aggressive organic, highly basic or hot solutions, and as transducer protectors. These Choice Syringe Filters can filter aqueous solutions without the need for pre-wetting with an alcohol.
Your Position : Home » News » 0.45um PTFE Filter » wheel filter ptfe 0.45 micron filter Restek. Product Category. 1-4mL Autosampler Vials for HPLC, UPLC, GC. 16mm,
Description. Rugged polypropylene housing. Autoclavable to 121°C for 15 minutes. Color coded for easy identification. Variety of filter types, porosities, and diameters.
Table-top Buchner funnels with medium porosity (45-90 microns) fixed filter plates are 6.4mm (1/4") thick high density polyethylene with a non-porous circumference to better fasten filter paper to the plate. The high density polyethylene rigid plate is 4.8mm (3/16") thick. Holes are 4.8mm. Related Products: Large Buchner Funnels.
Millipore FALP01300 White PTFE Fluoropore Hydrophobic Membrane Filter, 90mL/min x sq cm Water Flow Rate, 13mm Diameter, 1.0 Micron (Pack of 100) 100 - Millipore Millex-FH PTFE Membrane Filter for Vent or Vacuum - 50mm 0.45 µm
The membranes in Nalgene analytical filter units and funnels are CN (Cellulose Nitrate – a mixed cellulose ester with a predominance of cellulose nitrate material); 0.2 µm for trapping small bacteria and particles, or 0.45 µm pore size
Milliseal Membrane Seal, PTFE, 18 mm. Compare. Product No. Description. Pricing. FWMS01800. This is a 18 mm Hydrophobic PTFE Membrane Filter with a 0.45 micron