Professional ptfe membrane filter 0.45um Advantec

Hydrophobic PTFE syringe filters 25mm Diameter 0.45μm Pore Size For Industrial Filtration by KS-Tek Biotechnology (PACK OF 50) FEATRURE: Hydrophobic PTFE membrane has wide chemical compatibility, excellent corrosion resistance, high rejection, high flow, and can be sterilized in various ways.

0.45um PTFE Filter. Certified ptfe 0.2 micron filter Advantec . Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm | SLFG05010 ... Popular standard grade PTFE membrane ...

Advantec 25JP050AN Syringe Filters, 0.5 um Hydrophobic PTFE, 25 mm; 50/Pk: Amazon.com: Industrial & Scientific

Pure PTFE Filters. Pure PTFE fibers are sintered to improve handling characteristics and to minimize fiber slough-off for minimal downstream contamination with Hydrophobic charactarization. Porosity: High air permeability with minimal pressure drop and wide range of operating temperature range: -120°C to 260°C. ORDER.

Media: PES (hydrophilic), PTFE (Hydrophobic or Hydrophilic), PP (hydrophobic) Pore size or nominal rating: 0.2-0.45 um, 0.05-1.0 um, 0.20 um, 0.8-30 um, 0.45-1.0 um; Cannot be used for air filtration ; Typical Applications. Filter tissue culture media, fermentation broth, and ground water; Can be set in serial mode to maximize throughput volumes

10 Pack Syringe Filter Sterile PES Hydrophilic Filtration 0.22um Pore Size, 33mm Membrane Diameter Sterile PES Membrane Individually Packed by Membrane Solutions 4.5 out of 5 stars 361 #1 Best Seller in Syringe Lab Filters

Non-Sterile Mixed Cellulose Esters Membrane Filters - White, 0.45µm. Advantec MFS. Esters (MCE) membrane is a general purpose filter used in many applications for the microbiological examination of water, wastewater, pharmaceuticals, food, and beverages, and air monitoring. MCE membranes offer high recovery rates and superior flow rates.

Buy Advantec A045H047Y Sterile MCE Gridded Filters, 0.45um, 47mm Dia; 200/Pk and more from our comprehensive selection of Advantec Sterile Mixed Cellulose Ester (MCE) Filter Membranes

PerkinElmer. Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are.

Advantec membran filter 0,45um 47mm. Mixed cellulose ester membranes are suitable for microbiological analysis of water, wastewater, pharmaceuticals, or beverages. Offered with or without grid lines; grid lines facilitate counting colonies on the membrane surface. Grid squares measure 3.1 mm and represent 1/100 of the area of a 47-mm membrane.

Membrane filters or “membranes” are microporous plastic films with specific pore size ratings. Ultrafiltration Membranes. Advantec Ultrafilters are anisotropic permselective membranes that segregate dissolved solutes at the membranes surface on a basis of molecular weight Color Swatch Image.

Advantec HYDROPHILIC PTFE Syringe Filter 13HP020AN, Pore Size 0.2um, Diameter 13mm, Unit Quantity 100 (+$151.40) 13HP045AN, Pore Size 0.45um, Diameter 13mm, Unit Quantity 100 (+$151.40)

Sterlitech PES (polyethersulfone) membrane filters, 0.45 micron pore size, 13 mm diameter, pack of 100. Hydrophilic, low protein/drug binding, minimal extractables, and broad chemical tolerance; ideal for pharmaceutical, medical, and life science applications.

MilliporeSigma. This 25 mm syringe filter with a Graduated Glass Fiber & Nylon membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarifying of aqueous & mild organic solutions with high particulate levels. Low-extractable polyethylene housing Female Luer-Lok™ inlet.

Syringe Filters, Mixed Cellulose Esters (MCE), Sterile, 0.45(μm), 25mm, 100/pack is available to buy in increments of 1 Details HPLC Certified High-quality and cost-effective Syringe Filters are available in a broad range of membrane materials with sterile and non-sterile packaging options.