polypropylene housing 0.45um ptfe syringe filter manufacturer

These syringe filters are available in a variety of filter membrane materials in both 0.2um and 0.45um pore sizes. The filter membranes are reinforced with polypropylene housing, with a female Luer-lok inlet and a male Luer slip outlet. All materials comply with USP Class VI Standards and are available for both sterile and non-sterile applications.

Syringe Filter, PVDF, 0.45µm, 13mm Diameter. Denville. polypropylene which is chemically resistant to a wide range of solutes and solvents. Denville Scientific Syringe Filters are constructed so that the sample must pass through the membrane, not leak around it. Denville Syringe Filters are easy to use.

Cellulose Acetate, Nylon, Glass Fiber, PES, Polypropylene, PTFE, PVDF Cellulose Acetate, Glass Fiber, Nylon, PES, Polypropylene, PTFE, PVDF Housing Diameter 13 mm 18 mm 33 mm 33 mm 17 mm 33 mm Membrane Diameter 18 mm 13 mm 25 mm 25 mm 22 mm 30 mm Effective Filtration Area 0.76 cm² 0.76 cm² 4.6 cm² 4.6 cm² 1.4 cm² 4.8 cm² Housing Material

Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are Related Products: 4 Mm Syringe Filter

• 13 and 25 mm diameter syringe filters • 13 mm devices for samples up to 10 ml and 25 mm devices for samples greater than 10 ml (however, the volume of sample that can be filtered through each filter depends on the characteristics of the sample) • Sterile options • Pigment-free polypropylene housing. Benefits

Constructed of a pigment- free polypropylene housing with a pre filtration stack of microseparations MGF (Micro glass fiber media), these filters eliminate sample contamination and allow you to filter even the most difficult samples with less hand pressure. Applications MG D/X Syringe Filters are ideal for heavily particulate-laden sample found in:

Millex Samplicity Filters, 0.45µm. To be used with the Samplicity Filtration System. Powered by vacuum, the system takes minimal manual effort to filter 1 to 8 samples into standard HPLC vials in seconds, with higher recovery than syringe filters provide. To be used with the Samplicity Filtration System.

ACRODISC 25mm w/ 0.45um PTFE 50pk. “Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please email us a question or call 1-800-521-1520."

Qualisil Hydrophilic PTFE Syringe Filter 33mm x 0.45um (Q33PTL045E) Housing Material: Polypropylene. ... More Manufacturers and Suppliers of PTFE Syringe Filters.

Feb 17, 2020 · PTFE Hydrophilic Syringe Filters 0.2 or 0.45um Resisting nearly all corrosive chemicals makes PTFE syringe filters an ideal choice. However, natural hydrophobic PTFE has it’s disadvantages not letting aqueous solutions passing through while many of these chemicals are diluted with water.

CPW291508: PTFE Sterile Syringe Filters with Polypropylene Housing, 0.20 µm Pore Size, 25 mm Dia., Luer Connections: 50/BX

PerkinElmer. Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are.

SLHV033NK. MilliporeSigma. 33 mm syringe filter with a Hydrophilic PVDF membrane, for non-sterile filtration, has a 0.45 µm pore size used in preparation of protein-containing solutions prior to chromatography or other instrument analyses. Color Code: Yellow Diameter: 33mm Pore Size: 0.45um Material:.

The Xiboshi syringe filters are specifically designed for high particulate loaded samples. Constructed of a pigment-free polypropylene housing with a prefiltration stack of PP Polypropylene fiber 1um and Glass microfiber media 1um, these filters eliminate sample contamination and allow you to filter even the most difficult samples with less hand pressure.

Tisch Scientific offers an extensive selection of proven, yet affordable syringe filters that are in stock and ready to ship today. Selected for their durability, material quality and performance characteristics, our syringe filters deliver accurate, measurable results at a fraction of the cost.