Syringe Filter, PTFE, 25mm diameter, 0.45um, 100/pk (Scientific Strategies # FPT250045-100PK) Polytetrafluorethylene is used for the filtration of aggressive chemicals, including acids and non-aqueous solvents, as well as for GC and HPLC sample preparation
Find 0.45UM PTFE syringe filter and related products for scientific research at MilliporeSigma Product Number Product Description SDS SLLG033 Replaces SLLGH25NK, 0.20 µm pore size, 33 mm diameter, Millex-LG hydrophilic PTFE membrane Pricing
Syringe Filter, 30 um, Pore Size 0.45 um, Filter Material PTFE, Housing Material Polypropylene, Inlet Connection Male Luer-Lok(TM), Outlet Connection Tapered 4mm OD, Package Quantity 30 Features Pore Size: 0.45 um Filter Material: PTFE Item: Syringe Filter
DX Polypropylene Syringe Filter, 0.45um, 25mm, 100/pk. In stock and available for shipping, Polypropylene membrane type Available pore sizes are 0.22um and 0.45um Available diameters are 4mm, 13mm and 25mm Compatible with most solvents, strong acids
PTFE Syringe Filter (Polytetrafluoroethylene, Hydrophobic,13mm/25mm) S13PTB022-B Nonsterile Hydrophobic PTFE Syringe Filters, Pore:0.22(μm), Housing Diameter:13(mm)
Designed for daily routine analysis. Fisherbrand Non-sterile PTFE Syringe Filter features a hydrophobic PTFE membrane for filtering HPLC organic solutions. Available in two membrane diameters (13 and 25mm) and two (0.2 and 0.45µm) pore sizes. Brand: Fisherbrand
Example: PTFE 017 N 045 I = 17mm Syringe Filter, Hydrophilic PTFE 0.45um, color coded Syringe Filter Chemical Compatibility of Membranes Please refer to the Chemical Compatibility Table .
Technical Parameters of PP Syringe Filter Diameter 13mm 25mm Housing Material Polypropylene Membrane Material PP Pore Size 0.1um, 0.22um, 0.45um, 0.8um, 1.0um Maximum Temperature ≤50 Inlet Connection Female luer lock Female luer lock Outlet
0.45um Nylon Syringe Filter And the nylon membrane syringe filter produced by Aijiren can be used for alkaline blotting and fixation. Aijiren’s PTFE syringe filter housing is made of high-quality polypropylene (PP) with high mechanical strength and good The ...
Syringe Filters, Syrfi Syringe Filters, 13MM 0.45UM PTFE HYDROPHILIC, 100/pk The PTFE (hydrophilic) membrane is recommended for elevated temperatures and most organic solvents, caustic, and acidic solutions. Does not require pre-wetting with an alcohol for
Syringe Filter (PTFE) A syringe filter (sometimes called a wheel filter if it has a wheel-like shape) is a single-use filter cartridge. It is attached to the end of a syringe for use. Syringe filters may have Luer lock fittings, though not universally so. The use of a needle is optional; where desired it may be fitted to the end of the syringe
24/6/2021 · Syringe filter, non-sterile, PTFE Hydrophilic, PP prefilter. Hydrophilic PTFE membrane is unsupported membrane that ideal for HPLC and mixtures of aqueous and organic solvents. Unsupported membrane means non-reinforced, single-ply thin membrane which has no support ability. Features*Lowest level of IC extractables, optimizing background levels
Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. 148.00€.
0.45um Syringe Filter Aijiren recommends that each syringe filter be used only about 10 times. If there are too many impurities in the reagent, the pore size of the syringe filter will be blocked and the filtration task cannot be completed. The Syringe filter provided
Whatman brand Puradisc syringe filters, H-PFTE, 25 mm diameter, 0.45 µm pore size, polypropylene housing, luer inlet/outlet connectors,6773-2504, 200 pack Whatman Puradisc 25 mm H-PTFE Syringe Filters 0.45 µm, Hydrophilic, 200 Pack, 6773-2504