Minisart 0.45um ptfe syringe filter for sterilization

Minisart® Syringe Filter, Polytetrafluorethylene (PTFE), Pore Size It can be used for venting and adsorption of substances. It has a male luer slip inlet and outlet. Version Q is

Millipore 0.45um ptfe syringe filter for sterilization-PTFE Home » News » 0.45um PTFE Filter » Millipore 0.45um ptfe syringe filter for sterilization. Product Category 1-4mL

Minisart ® High Flow with polyethersulfone (PES) is optimal for highest flow rates and a pH of 3 - 12. Type 16537 with a pore size of 0.45 µm can be used for clar Individually

Minisarts CA Syringe Filters/ Sartorius 16555K Minisart NML syringe filters for sterile and reliable filtration of small to medium volumes. The syringe filters are complete ready-to-connect filter units with cellulose acetate (CA) membrane.- Type: Syringe filter with male luer lock- Color: Yellow- Diameter: 28mm- Filtration area: 6.2 cm²- Hold-up volume:

Nalgene 4 mm diameter syringe filters (CA, Nylon) are designed to filter 0.5-1.0 ml. Nalgene 13 mm diameter syringe filters (PES, PTFE) are designed to filter 2-10 ml. Nalgene 25 mm diameter syringe filters (PES, PTFE, Nylon, SFCA, CA, and glass fiber

Sterile Filtration page 7 Removal of microorganisms and particles from liquids with hydrophilic Minisarts®, pore sizes <0.2 μm Sterile Venting page 15 Removal of microorganisms

15 mm PTFE PP 0.45 µm Male Luer Slip White, Printed No 50 17574-----K 15 mm PTFE PP 0.45 µm Male Luer Slip White, Printed No 500 17574-----Q 4 mm PTFE PP 0.2 µm Male Luer Slip Blue Tray No 500 17844 4 mm

Foxx Life Sciences. . Foxx Autofil® PP is designed to conveniently fit on top of most laboratory bottles with a GL45 thread. Autofil® PP is available in 3 different types of membrane: PES, Nylon, and PTFE. It is available in 2 different pore sizes: 0.2μm, or 0.45μm and it is available in 500mL and 1000mL.

Sartorius Minisart SRP Syringe Filters 0.2µm; 25mm; Sartorius Minisart SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Simple, rapid and reliable ultracleaning. Send Inquiry.

2017年10月18日 · SLHV033RS) can be used to clarify lentivirus and 0.2um Millex GV syringe filters (Cat. SLGV033RS) for sterilizing. PES Express Plus (PES): Use for faster flow (0.2um Millex GP, Cat. SLGP033RS, 0

Minisart® Syringe Filter, Polytetrafluorethylene (PTFE), Pore Size 0.45 µm, Non-Sterile, Male Luer Slip, Male Luer Slip, Pack Size 500 Added to Shopping Cart Minisart ®

Sartorius Minisart 17575-----K SRP Syringe Filter Minisart SRP syringe filters with a clean and chemically inert PTFE membrane. The units are ready-to-use and allow for

Prefiltration Minisart®-Help-to-Find Please refer to Minisart ® RC, NY or SRP for the highest chemical compatibility, page 8. Please refer to Minisart ® NML or Minisart High Flow on page 12. Several additional Minisart ® for venting and special purposes could be found on page 16.

Minisart NML Syringe Filters ETO-sterile | Syringe filter with male 28 mm | Hydrophilic Packaging: ETO-sterile Type: Syringe filter with male Luer Lock Diameter: 28 mm Reaction to water: Hydrophilic Pore size: 0,45 µm Pack size: 50 Membrane material: Surfactant-free cellulose acetate (SFCA) Housing material: Meta acrylate butadiene styrene polymerisate

2023年2月3日 · Sterile filtration, clarification, and particle removal. Minisart ® NML Syringe Filters provide the optimal method for clarification and sterilization of liquids, robustly removing bacteria and particles, without any impact on product quality or loss of target molecule. Superior filter areas up to 6.2 cm 2. 0.1µm to 5µm pore sizes.