2016/9/28 · Syringe filters normally use membrane type filters which have a specific particle size cut off (e.g. 0.45 μm). Syringe filters are also available for the filtration of
Minisart filters have a Luer Lock inlet and outlet, for positive attachment to the syringe. The filter is 26 mm in diameter with a hold-up volume of 0.1 mL. Suitable for clear aqueous solutions not requiring preliminary filtration.
Type 17762 with a pore size of 0.45 µm can be used for sample preparation and has a male luer slip outlet. Version Q is a non-sterile bulk pack. Units can be sterilized by autoclaving or EO. Non-sterile Minisart® RC syringe filters are supplied in bulk packs.
Minisart® NY with hydrophilic polyamide (nylon) is optimized for aqueous liquids and solvents with a pH of 3 - 14. Type 17846 with a pore size of 0.45 µm can be used for sample preparation. It has a male luer slip outlet. Version Q is a non-sterile bulk p
Syringe filter Minisart® NML Plus, Glass-fibre / Cellulose acetate (GF / CA) Syringe filter Minisart® NML, SFAC Sartorius Minisart Nml 26mm 0.45 um 17598-Q PART NO. 4AJ-7017213 Sartorius 17598-----Q 611-0710 Filters syringe filters CA 3 4 9 1 ...
Search results for minisart syringe filter 0.8 at Sigma-Aldrich Medical Millex-AA Syringe Filter Unit, 0.80 µm, mixed cellulose esters, 33 mm, sterilized by EtO 1 Product Result
Minisarts CA Syringe Filters/ Sartorius 16555K Minisart NML syringe filters for sterile and reliable filtration of small to medium volumes. The syringe filters are complete ready-to-connect filter units with cellulose acetate (CA) membrane.- Type: Syringe filter with male luer lock- Color: Yellow- Diameter: 28mm- Filtration area: 6.2 cm²- Hold-up volume: 0.15ml- Maximum pressure: 4.5 bar- Max
Syringe filter Minisart-plus, Cellulose acetate/glass-fibre (CA/GF) The only difference between the Sartorius Minisart-plus and the standard Minisart NML is an additional glass fibre pre-filter which enables a greater filtration volume for liquids which are difficult to filter.
Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45
Minisart ® High Flow with polyethersulfone (PES) is optimal for highest flow rates and a pH of 3 - 12. Type 16533 with a pore size of 0.45 µm can be used for clarification and has a male luer slip outlet. All materials of this filter element meet the requirements of the
Minisart GF: Binder-free glass fiber depth filter for clarification of liquids heavily laden with coarse particles; or may be used as a prefilter for 0.2 µm or 0.45 µm Minisarts. Related Products: Glass Fiber Syringe Filter
Filter Holders and Hardware Filter Paper Filtering Funnels Food and Beverage Testing Glass Fiber Filters and Prefilters Membranes for Filtration Syringe and Syringeless Filters
Type 17829 with a pore size of 0.45 µm can be used for clarification and has a male luer lock outlet. Version K is individually packed and sterilized by ethylene oxide (EO) Individually packed and sterile Minisart® NML Plus syringe filters are optimal for immediate usage whenever sterile filtration or clarification and cell removal from highly particle-laden liquids is needed.
Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17576 with a pore size of 0.45 µm can be used for sample preparation. All materials of this filter element meet the requirements of the
Bottle Tops and Filter Units Extraction Thimbles Filter Holders and Hardware Filter Paper Filtering Funnels Food and Beverage Testing Glass Fiber Filters and Prefilters Membranes for Filtration Syringe and Syringeless Filters