Millex 0.45um syringe filter for laboratory vacuum filter system

Millex Samplicity™ Filters, 0.45µm To be used with the Samplicity Filtration System. Powered by vacuum, the system takes minimal manual effort to filter 1 to 8 samples into standard HPLC vials in seconds, with higher recovery than syringe filters provide. - Find MSDS or SDS, a COA, data sheets and more information.

Millex-HV Syringe Filter Unit, 0.45 µm A 13 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. Comes in a pack of 100. - Find MSDS or SDS, a COA, data sheets and more information.

Overview of Non-Sterile Millex® Syringe Filters with PES Membrane: • Non-sterile Millex® syringe filters with Millipore Express® PLUS polyethersulfone (PES) membrane provide fast filtration of aqueous and mild organic solutions. • Available in 0.22 µm and 0.45 µm pore sizes and two diameters to suit your application needs.

PerkinElmer. Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are.

MilliporeSigma. This 25 mm syringe filter with a Hydrophilic PVDF membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarifying of proteinaceous solutions with high particulate levels. PVDF membrane with graduated glass fiber prefilter Recommended for filtering solvents .

Ready-to-use, syringe-driven units designed for sterilizing and clarifying sterile solutions are available in 0.1, 0.22, 0.45 and 5.0μm pore sizes. Available in 4, 13, 25, 33, and 50 mm diameters with a variety of membranes, Millex™ sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas.

Syringe filters with different pore size ratings are suitable for different applications. For example, syringe filters containing 0.45 μm are typically used for HPLC sample preparation and 0.2 μm is used for UHPLC. In life science applications 0.1 and 0.2 µm pore sizes provide sterilization of buffers, culture media, and additives.

Overview of Non-Sterile Millex® Syringe Filters with Durapore® (PVDF) Membrane. •Low protein binding to minimize interaction with your sample and maximize recovery. •Compatible with aqueous and mild organic solutions. •Available in 0.22 μm and 0.45 μm pore sizes and three diameters to suit your application needs.

Millex-FH Filter, 0.45 µm A 50 mm diameter non-sterile syringe filter with a 0.45 µm pore size hydrophobic PTFE membrane. Comes in a pack of 100. - Find MSDS or SDS, a COA, data sheets and more information.

MilliporeSigma™ Millex™ Sterile Syringe Filters: Durapore™ PVFD Membrane Ready-to-use, syringe-driven units designed for sterilizing and clarifying sterile solutions are available in 0.1, 0.22, 0.45 and 5.0µm pore sizes

EMD Millipore Millex™-GP Sterile Syringe Filters with PES Membrane are ready-to-use, syringe-driven units with a unique membrane that results in six times less protein binding. Available in a medical grade unit, with a PES or acrylic tip. Available in 4, 13, 25, 33, and 50 mm diameters with a variety of membranes, Millex™ sterile syringe

Millex Syringe Filters Non Sterile We provide wide range of Millex Syringe filters that suits your application. Mixed Ester of Cellulose [MCE] Non-sterile. Millex MCE syringe filter is made up of hydrophilic mixed cellulose esters (MCE) membrane and is available in 0.22 µm, 0.45 µm and 0.80 µm pore sizes to suit your application needs.

Ptfe 0.45 at Thomas ScientificRed PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 25 mm. PerkinElmer. Hydrophobic PTFE syringe filters have broad chemical compatibility and high pH r

MilliporeSigma™ Millex™-FH Syringe Filter Unit, Hydrophobic PTFE, 0.45 μm. Protect vacuum sources and tank/bioreactor venting from contamination and moisture damage. Millex™ Filters: Inlet and Outlet for Latex Tubing are constructed of sturdy polypropylene with hydrophobic PTFE membranes. $186.00 - $1,250.00. See promotional offers below.

Non-sterile HPF Millex ® filters include a graduated glass fiber prefilter to removed larger particles and either a 0.20 µm or 0.45 µm membrane filter for fine filtration. This combination of membranes provides significantly greater throughput than standard filters without prefiltration media, especially when filtering particle laden solutions.