luer lock 0.45um syringe filter Millipore

- Sterivex filter units work with syringes, peristaltic pumps or pressure vessels. They eliminate the risk of contamination associated with decanting or pipetting. - Sterivex units are designed to dispense into virtually any storage container. The devices are available with different outlet connections (see table). - Sterivex filter units can process volumes up to 1,000 mL or 2,000 mL, depending on the type of membrane used in the device. A choice of three different membranes is provided. - Filter-sterilize volumes up to 1,000 mL or 2,000 mL, using Sterivex™ pressure-driven filter units (capacity depends on the type of membrane used in the device). With three different membrane options and a variety of outlet connection options, Sterivex filters can fit virtually any workflow and dispense into nearly any storage container. Sterivex filters work with syringes, peristaltic pumps or pressure vessels and eliminate the risk of contamination associated with decanting or pipetting. Feature See full list on sigmaaldrich.com Directions for Use • Organism Retention: Microorganisms • Mode of Action: Filtering • Application: Sterile Filtration • Intended Use: Large-volume filtration using positive pressure • Instructions for Use: Please refer to Instructions for Use section of Sterivex™ user guide • Storage Statement: Store in dry location • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations. See full list on sigmaaldrich.com Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany Eastar is a trademark of Eastman Chemical Company Luer-Lok is a registered trademark of Becton-Dickinson & Co. Sterivex is a trademark of Merck KGaA, Darmstadt, Germany See full list on sigmaaldrich.com

PTFE Syringe Filters, 1 um, 20mm, Threaded Double Luer Lock, ABS Housing, sterile, 1000 per pack TSH-SPEC18149 $2,344.60 Ideal for laboratory small volume samples clarification and particles removal.Features and Benefits Easy to use Wide range of filter media Applicable to samples below 60mL Disposable design Quality

Syringe filters (or wheel filters) are a single-use filter cartridge locate at the end of a syringe. Syringe filters can have luer lock fittings for a secure fit to the syringe. Choose from our wide assortment of filters to suit your application. Syringe filters come in a variety of membrane types.

and Target2™ syringe filters ensure reliable elimination of both particles and micro organisms in the sample preparation process, providing consistent and reliable experimental results for a range of samples and applications. Titan3 and Target2 syringe filters protect chromatography columns by preventing the accumulation of

Fisherbrand SF16003 Filters, Syringe - nylon, 0.45um, 33mm dia., 100/PK Price: $416.33 Gold Standard DTS1235 Zeta potential transfer standard (DTS1235) Zeta Potential Transfer Standard BX of 10 Syringes.

All Captiva premium syringe filters are shipped with an HPLC or LC/MS certificate that guarantees low levels of observed extractables. Excellent flow rates and maximum sample loading capacities. Every syringe filter is constructed with the highest-grade virgin polypropylene or MBS housing. Securely welded to prevent bursting and ensure sample

Minisart filters have a Luer Lock inlet and outlet, for positive attachment to the syringe. The filter is 26 mm in diameter with a hold-up volume of 0.1 mL. Suitable for clear aqueous solutions not requiring preliminary filtration.

CELLTREAT Scientific Products 0.45µm PES Syringe Filter. Filters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives. Female luer-lock inlet and make luer slip outlet. Color coded by membrane type for easy identification. PES (Polyethersulfone)-Most Popular Membrane.

Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Pricing and Availability.

Nest syringe filters have pore size either 0.22µm or 0.45µm, and diameter 13mm or 25mm, with membrane materials either with PES or PVDF membranes. For sample volumes of 2mL to 100mL. Retention volume <115µL. Maximum operating temperature: 100°C autoclave at 125°C for 15 min. Maximum operating pressure approximately 100 ps.

These Corning syringe filters have polypropylene copolymer housings, female luer lock inlets and male luer slip outlets. Nylon (NY) membranes are naturally hydrophilic, surfactant-free and offer the lowest extractables; 100% integrity tested, sterile and certified nonpyrogenic and noncytotoxic; Manufactured in accordance with ISO 9002 standards

These syringe filters are ideal for filtration of gas and organic solvents Polypropylene housing HPLC certified The polypropylene housing is fitted with female Luer-lock inlet and male slip Luer outlet. The hydrophobic PTFE membrane, on a polypropylene support, has broad chemical

Single Use 25mm 0.22/0.45um MCE Luer Lock Disposable Sterile Pp Syringe Driven Filters/millipore Membrane Filter Introduction Syringe Filter MCE MCE Syringe filters are modified to offer researchers the lowest binding filters available. Due to the extremely low binding characteristics, these filters provide higher throughputs than competitive

Minisart® Syringe Filter, Polyethersulfone (PES), Pore Size 0.45 µm, Ethylene Oxide, Female Luer Lock, Male Luer Slip, Pack Size 50 Added to Shopping Cart Minisart ® High Flow with polyethersulfone (PES) is optimal for highest flow rates and a pH of 3 - 12.

Feb 12, 2015 · 10-100x Ptfe Syringe Filter, 0.45 Um Pore Size, 25mm Diameter, Hydrophobic, Hplc: New. US Seller. HPLC sample preparation. Pore size( m). 10-100 PCS Polytetrafluoroethylene (PTFE) Syringe Filters. Removal of protein precipitates. Content uniformity. Routine QC analysis. Prefilter Glass fiber. Female Luer Lock inlet and Male Luer slip outlet.