Millex-LCR Syringe Filter 0.45um Hydrophilic PTFE - 33 mm - Non-sterile Syringe Filters Minisart High Flow PES 28mm Luer Lock royal blue 0.22um Sterile.
Minisart ® Acticosart with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases with a pH of 3 Type 17840 has a 0.45 µm.
Syringe Filter Minisart SRP25, PTFE, 25 mm, 0.45µm, non-sterile, 50 pc/PAK Luer Slip Diameter: 25 mm Reaction to water: Hydrophobic Pore size: 0,45 µm ...
Minisart® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 – 14. Type 17559 with a pore size of
Samplicity G2 System has lower ergonomic impact than manual syringe filtration. Available in 0.20 µm and 0.45 µm pore sizes with hydrophilic PTFE,
Minisart® Syringe Filter, Polyethersulfone (PES), Pore Size 0.45 µm, Ethylene Oxide, Female Luer Lock, Male Luer Slip, Pack Size 50, by Sartorius.
Sartorius, 17574----------K – Minisart 0.45um Syringe Filter | Lab Sartorius Minisart Target2™ PTFE Syringe Filters, 0.45μm, 30mm, with Pre-Filter.
For hydrophilic solutions pre-rinsing with a solvent is necessary to make the hydrophobic membrane permeable for aqueous liquids. Due to the hydrophobic nature
Minisart® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17574 with a pore size of 0.45
Minisart filters pore size 0.2 μm | Sigma-AldrichMinisart filters have a Luer Lock inlet and outlet, for positive attachment to the syringe.
It has very similar application with hydrophobic PVDF, also used with aggressive solvents, strong acids, alcohols, bases and aromatics. Features. 1. Hydrophobic
0.45 μm Male Luer Slip. Yellow Tray. No. 500. 17822----------Q. Minisart® SRP (Hydrophobic PTFE). 25 mm. PTFE. PP. 0.2 μm Male Luer Slip. White, Printed Yes.
Apr 18, 2011 http://www.abnova.com ) - A syringe filter is a single-use filter cartridge. It can be used to remove particles from a sample.
0.45 µm. Male Luer Slip. Yellow Tray. No. 500. 17822----------Q. Minisart® SRP (Hydrophobic PTFE). 25 mm. PTFE. PP. 0.2 µm. Male Luer Slip. White, Printed.
