Ideal for busy, high-volume labs. Available in a wide range of sizes, formats, and membranes to cover every matrix and sample type. All Captiva premium syringe filters are shipped with an HPLC or LC/MS certificate that guarantees low levels of observed extractables. Excellent flow rates and maximum sample loading capacities.
Milliseal Membrane Seal, PTFE, 18 mm This is a 18 mm Hydrophobic PTFE Membrane Filter with a 0.45 micron pore size. For use in Sterilizing filtration, bioassays, solvent filtration. - Find MSDS or SDS, a COA, data sheets and more information.
Description MilliWrap membrane seals are convenient replacements for metal caps, parafilm, cotton plugs and lids on laboratory containers. The 0.45μm ( 0.45 micron filter ) pore size material forms an efficient barrier to prevent contamination due to condensation and airborne particles.
PerkinElmer. Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are.
0.45 membrane filter can also be used for pre-filter for samples with a high filtration speed. Although hydrophobic, polypropylene membrane can still be used with water and aqueous solutions after wetted with alcohol (or similar water-miscible low surface tension fluid).
The 50 mm Millex® filter units are especially useful for vacuum line protection. All units are bi-directional. A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, ethylene oxide sterilized. Ideal for sterilizing gases, venting sterile containers, and sterilizing or clarifying organic solutions.
Millex-FA Syringe Filter Unit, 1.0 µm, hydrophobic PTFE, 50 mm, HB-HB A 50 mm diameter non-sterile syringe filter with a 1 µm filter pore size hydrophobic PTFE membrane. The 1 micron filter comes in a pack of 10.; find Millipore-SLFA050 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich
These 25 mm syringe filters offer an available prefiltration layer and wide choice of filter media.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the
Buy online laboratory pfte filters in India at Biomall.in. Get wide range of hydrophobic pfte filters ideal for research and clinical labs. filter PVDF, 0.45 ...
Millex Syringe Filter, Hydrophilic PTFE, HPF, Non-sterile 0.45 µm pore size, 25 mm diameter, Millex-LCR hydrophilic PTFE membrane with glass fiber prefilter, domed housing - Find MSDS or SDS, a COA, data sheets and more information.
Merck ptfe 0.2 micron filter for chemicals . Whatman® membrane filters PTFE pore size 0.2 μm, Usual pore sizes are 0.2 μm and 0.5 μm. Sterile venting of vacuum
PTFE Membrane Disc Filters - TF 450, 0.45 µm, 142 mm (25/pkg) Product ID 66151. Diameter 142 mm. Minimum Bubble Point 0.4 bar. Pore Size 0.45 µm. Typical Thickness
Is the Ultrafree MC/CL available with a PTFE membrane? Yes, the Ultrafree MC/CL is available is with a either a 0.22um or 0.45um "LCR" hydrophilic PTFE membrane. These products are available in packages of twenty-five units under the following catalog numbers: 0.22 micron - UFC3 0LG 25 and 0.45 micron - UFC3 0LH 25.
Millipore SLFH05010 Inline Filter Hydrophobic PTFE Hydrophobic PTFE Millex-FH50 Inline Filter Unit, 4.1 bar, 0.45 Micron, Inlet and Outlet Stepped Hose Barb with Female x Hose Barb with Female Luer Connection, 50mm Diameter (Pack of 10): Science Lab Inline Filters: Amazon.com: Industrial & Scientific
