hydrophobic 0.45um ptfe filter Expression

Millex-LCR for Samplicity G2, 0.45 µm, hydrophilic PTFE, 33 mm, non-sterile This 33 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses.

Hydrophobic PTFE Polypropylene Polypropylene • Fluoromax is durable and effective filter de- ... 0.45um 2 1 50 100 150 200 250 300 ...

The PTFE (hydrophobic) membrane is recommended for elevated temperatures and most organic solvents, caustic, and acidic solutions. NOTE: requires pre-wetting with an alcohol for high aqueous samples. Filter inlet can be connected to either a Luer slip or lock syringe. Filter outlet can accommodate a Luer slip needle or other connector.

PerkinElmer. Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are.

Hydrophobic 0.45 Um Ptfe Vent Filter For Water Tank , Find Complete Details about Hydrophobic 0.45 Um Ptfe Vent Filter For Water Tank,Vent Filter For Water Tank,Vent Filter,Ptfe Air Vent Filter Cartridge from Other Industrial Filtration Equipment Supplier or Manufacturer-Hangzhou Tianshan Precision Filter Material Co., Ltd.

PTFE is naturally hydrophobic and has difficulty aqueous solutions, especially when using 0.45 micron or smaller. Prewetting with a non-polar substance such as methanol will improve the performance when working with aqueous samples. Strongly acidic samples may be able to filter without prewetting.

Corning™ Stripettor™ Ultra Pipet Controller Accessory, Hydrophobic PTFE Filters Extreme chemical resistance of PTFE membranes makes them very useful for filtering solvents or other aggressive chemicals for which other membranes are unsuitable.

For samples composed of acids and bases, hydrophilic PTFE membrane syringe filters and PES membrane syringe filters may be considered. For samples composed of nonaqueous solvents that are not compatible with nylon, PTFE membrane syringe filters and polypropylene membrane syringe filters may be considered.

25mm PTFE Hydrophobic Syringe Filter 0.22um with Outer Ring.100pcs/pk. C0000613. 25mm PTFE Hydrophobic Syringe Filter 0.45um with Outer Ring.100pcs/pk. C0000630. 33mm PTFE Hydrophobic Syringe Filter 0.22um with Outer Ring.100pcs/pk. C0000631. 33mm PTFE Hydrophobic Syringe Filter 0.45um with Outer Ring.100pcs/pk.

33mm, 0.45um, Hydrophobic PTFE, ASF3315TS, Non-sterile, Syringe Filter, 100pc/pack

Hydrophobic PTFE Syringe Filters exhibit a broad chemical compatibility (common solvents). Low protein-binding and low extractable. For use with high aqueous solutions, pre-wet filter membrane with MeOH, then rinse with deionized water before filtering samples.

General description Filter Code: JHWP Filter Type: Screen filter Our Fluoropore ® membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications.

Membrane Filters 0.45um found in: Filter PTFE Membrane 0.45um Pk5, Filter Membrane PTFE 0.45um, WCN WH 50MM 0.45uM 100/PK, Autofil® PP Bottle-Top Filters..

Durapore® Membrane Filter, 0.45 µm 0.45 µm pore size, hydrophobic PVDF, 47 mm membrane; find Millipore-HVHP04700 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich

Description Syringe Filters, 0.5 um Hydrophilic PTFE, 25 mm; 100/Pk. Key Features. Non-pigmented acrylic or polypropylene (PP) housings feature integral filter sealing to avoid the risk of contamination from pigments and adhesives. Each filter is clearly marked with membrane pore size. Housings have standard luer connectors; 50-mm filters