high flow rate ptfe 0.45 micron filter for petrochemicals

TefTEC Series Filter Cartridge, 0.45 Micron, 10" Length, 222/Flat Single Open End with Teflon Seals Item # TEFTEC 0.45-10P3T High surface area, single-layer construction provides superior flow rates and minimizes filtration system size

No extractable and with absolute micron rating from 0.1, 0.2, 0.45, 0.65 to 1 um, the N66 cartridge filters are able to remove particles and bacteria. Large voids volume combines with large porous medium provide superior flow rate and low pressure drops to enhance the service life span of filter.

PTFE Capsule filter is with PTFE membrane, high flow rate, can choose filter media with glass fiber to prolong the service life, suitable for large sample volume and something difficult to filter. Widely used in the filtration of pharmaceutical, food and beverage and the filtration of small injection, tissue cultural media and liquid filtration.

MS® KynarPure HY series PVDF cartridge filters are high capacity with 0.45/0.22 micron hydrophilic PVDF membrane, low protein binding sterilizing grade filters. PVDF membrane has uniform pore size distribution, high flow rate and low pressure, controllable filter area.

Memtrex FE filters are available the following absolute pore size micron ratings: 0.1, 0.2, 0.45 and 1.0 µm. Typical Applications: Aggressive solvents such as alcohols, esters and ketones, Corrosive acids and bases, Vents/exhausts for autoclaves, fermentors, and storage tanks, High purity chemicals and water used in electronics manufacturing.

Our Fluoropore™ membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications. Fluoropore™ membranes provide broad chemical compatibility, high flow rates and consistency.

Browse Item # 08FPT00520XX, Microfiberglass Filter Cartridge - Polypro DOE End Caps, EPR Gasket - 0.45 Micron -20" in the Porvair Filtration Group catalog including Item #,Item Name,Description,Type,Media,End Caps,Micron Rating,Length,OD,Cartridge St

Water Tec is a low cost Polyethersulphone membrane filter rated at 0.05, 0.1, 0.2, 0.45 and 0.65 micron. This filter is still produced to similar exacting standards but with economy more in mind. The surface area still exceeds most competitors standard products and this product is still produced in full clean room conditions under ISO 9001.

0.22 0.45 5 Micron pleated cartridge filter for PP/PTFE/PES membrane Pleated filter cartridge Introduction: The PP pleated filter cartridge uses pleated polypropylene fiber membrane as filtration media. The PP Polypropylene cartridge is an advanced fixed intensive filter and available in a wide range of retention rating from 0.1μm to 60μm.

Vessels to accommodate filter bags and high flow elements capable of increasing flow rates by four times and providing absolute 0.19 0.45: 1.0 0.05: 0.1 0.19 ...

High quality DOE Thread 60 inch 0.45 Micron Pleated Membrane PTFE Water Filter from China, China's leading 60inch PTFE Water Filter product, with strict quality control DOE Thread PTFE Water Filter factories, producing high quality 0.45 Micron Pleated membrane filter products.

Furnished as a complete 500ml unit with a convenient tubing nozzle. Includes a borosilicate prefilter for high flow rates. The connection seals on to any standard bottle 33-45mm. Can be used up to 50°C. Diameter: 76mm. Filter Area: 39.2cm. PTFE. Pore Size: 0.45µm. 12/Pack. Whatman #: 10443425.

Non-Sterile Mixed Cellulose Esters (MCE) Membrane Filters - Black, 0.45µm. Advantec MFS. Esters (MCE) membrane is a general purpose filter used in many applications for the microbiological examination of water, wastewater, pharmaceuticals, food, and beverages, and air monitoring. MCE membranes offer high recovery rates and superior flow rates.

TefTEC FLOW RATE Typical Flow Rate Clean Water at Ambient Temperature (per 10" cartridge) For liquids other than water, multiply pressure drop by the fluid viscosity in centipoise TefTEC AIR FLOW RATE Air Flow Rate (per 10" cartridge) Test conditions: System pressure at 30 psig, 65°F (18°C) INTEGRITY TEST SPECIFICATIONS

PTFE Unlaminated Membrane Filters, 0.45 micron, 293mm, 10/Pk Product code PTU04529310