high flow rate ptfe 0.45 micron filter for hospitals

Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are Related Products: 4 Mm Syringe Filter

Filter Rating Code Micron 924 0.04 001 0.10 002 0.20 004 0.45 006 0.65 008 0.85 Gasket/O-Rings Code Material 0 Buna-N 1 EPDM 2 Silicone 4 Viton® 5* FEP-Encapsulated Viton® 6* FEP-Encapsulated Silicone N None *O-Ring only Performance Attributes Water fl ow rates, Typical* Micron gpm/psid lpm/100mbar 0.04 1.0 5.29 0.10 1.8 9.88 0.20 3.7 20 0

The GPFA all-fluoropolymer filter cartridge series provides superior chemical . compatibility, temperature range, with ultra-low extractables for the most demanding needs of the micro-electronics industry. Ideal for aggressive “wet-etch and clean” applications. The PTFE membrane offers high flow rate at low pressure drop,

Jul 15, 2016 · Low pressure drop and high flow rate due to high filtration areaof0.7m2Per10”cartridge Inherently hydrophobic expanded PTFE micro porous membrane for broad chemical compatibility & to prevent moistureobstructioninventing&wetairfiltration Absolute rated & precisely controlled pore size distribution forsuperior&constantbacterialretention

• Small diameter fibers ensure high flow rates at low Filter grades 0.2, 0.45, 1, 3, 10, 30, 50 μm ... Netting Color Micron Rating Green 0.2 Yellow 0.45 White ...

• High flow rate increases throughput • Compatible with most standard filter housings Code • All filters are 100% integrity tested • Select pleating provides high flow rates • High temperature available Performance Characteristics FLUOrOFLOW-SELECT Filter Cartridges • liquid filters • polytetrafluoroethylene (PTFE) 350 300 250 200

Millipore LCR (Hydrophilic PTFE) with Glass Fiber Pre-filter 0.45 LCR 100 mL 50 SLCRM25NS 1000 SLCRM25NK 0.2 0 LG 100 mL 50 SLLGM25NS 1000 SLLGM25NK Durapore (PVDF) Membrane and Glass Fiber Pre-filter 0.45 HV 100 mL 50 SLHVM25NS 200 (8 x 25) SLHVMZ5NZ 1000 SLHVM25NK Nylon Membrane and Glass Fiber Pre-filter

PureFlo PTFE Filter Cartridges Removal Rating End Modifications Length O-Ring / Gasket Materials Package Qty Inserts 10 - 0.10 micron 0 = 222 O-Ring Flat 1 - 10" E = EPDM 1 = 1pc/ packBlank = Standard MBF = Hydrophobic 20 - 0.20 micron 5 = 222 O-Ring Spear 2 - 20" N = Buna N PTFE w/ High Temp PP 45 - 0.45 micron 6 = 226 O-Ring Flat 3 - 30" S

Safety feature – Filter housing has been designed to withstand high operating pressures to avoid filter burst during use. Versatile – Available with a water wettable wwPTFE membrane for maximum chemical compatibility, fast flow rates, low protein binding, and low levels of UVabsorbing extractables.

Disposable 50 mm PES filters are compact devices with a unique design, incorporating a low protein binding, high throughput, high flow rate PES membrane with a special inbuilt PTFE vent to ensure unique performance advantages

Available pore sizes 0.04, 0.1, 0.2, 0.45, 0.65. Glass Microfiber. Microfiberglass liquid filters deliver reliable and cost-effective removal of particulate and microorganisms from pharmaceutical liquids. The glass micro-fiber filtration media offers maximum throughput and flow rates for economical clarification. Filter Capsules and Devices

The filter membrane is Polyethersulfone (PES) material in 0.22µm or 0.45µm pore sizes for rapid flow rate and low protein binding. Bottle top filters are compatible with 45mm neck bottles. The bottle top filters are sterile (gamma irradiated) and Related Products: Filter Top

The Pall Kleen-Change® RRC Assembly is available with 0.2 μm, 0.45 μm, 1 μm and 3 μm retention ratings. The Kleen-Change RRC assembly offers a combination of proprietary PTFE membrane and specially engineered PTFE support material to provide superior flow performance for these sub-micron rated filters.

Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common

Capsules and in-line filters are designed for filtering certain gases or liquids. Choose from disposable or reusable filters for general or specialty uses. When selecting a filter consider the filter media, chemical compatibility, airflow rates, water flow rates, if you need sterile filters, filtration area, filter dimensions, and pore size