high flow rate ptfe 0.45 micron filter for fertilizers

Fluorodyne II filters feature a unique hydrophilic modified polyvinylidene fluoride (PVDF) membrane with low binding properties, broad chemical and temperature resistance and high flow rates. Fluorodyne II Grade DBL Filters These 0.45 micron rated filters are predominantly used in pre-filtration applications or viscous fluid filtrations.

Excellent performance of high temperature-resistance, repeat steamability in situ. Hydrophobic membrane with high flow. Low pressure drop, high flow rate, long service life 100% integrity tested Non fiber-releasing Applications Fermentation tank, Vent filter of hold tank. Electronic industry Semiconductor: Ultrapure gas filtration Chemical industry

The Pall Kleen-Change® RRC Assembly is available with 0.2 μm, 0.45 μm, 1 μm and 3 μm retention ratings. The Kleen-Change RRC assembly offers a combination of proprietary PTFE membrane and specially engineered PTFE support material to provide superior flow performance for these sub-micron rated filters.

Syringe filters for ion chromatography are available in 0.05 µm, 0.10 µm, 0.22 µm, 0.45 µm, 0.70 µm, 0.80 µm, 1 µm, 3 µm, 5 µm, and 10 µm pore sizes. If you need to extend the life of the filter or allow for increased flow during filter life, choose a syringe filter with a prefilter. Diameter

Air Flow Rate DIFFERENTIAL PRESSURE 0 10 20 30 40 50 PSI 0.1 µm 0.45 µm 1.0 µm System pressure at 0.2 µm < 10 psig (vent), 65°F (18°C). Outlet open to atmosphere. Air Flow Rate *High temperature construction (cage, core, and caps): maximum temperature 200°F (93.3°C) – available only in 222 or 226 with Fin or Flat end caps. Filter Housings

Disposable 50 mm PES filters are compact devices with a unique design, incorporating a low protein binding, high throughput, high flow rate PES membrane with a special inbuilt PTFE vent to ensure unique performance advantages

PTFE Vent Filter, Sterile, 0.45 Micron, 50mm, 1/4 in to 3/8 in hose BARB, 10/Pk. Sterile venting of filling vessels, including culture vessels and CO2incubators. Venting of holding tanks for sterile, distilled water and liquid culture media. Autoclave venting. In-line sterilization and particulate removal from air and gases.

Designed for fast and reliable filtration of small to medium volumes. Sartorius Minisart™ High Flow (HF) Syringe Filters are complete, ready-to-connect units with a high-flow PES membrane. These 28mm filters are available in sterile and non-sterile options, with a 0.2 or 0.45μm pore size. Pricing and Availability.

0.45 Micron, PTFE Laminated Membrane Filters Laminated PTFE features improved handleability, enabling convenient use in most disc filter holders. These filters are suitable for a wide variety of applications including clarification of compatible non-aqueous solvents, phase separations investigations, venting including water repellency, and

Intended Use: Retention or removal of biological contaminants. Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 μm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 μm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis.

Item Filter Cartridge; Filter Cartridges Sub-Category Pleated Cartridges; Micron Rating 0.45; Height 20 in; Filter Diameter 2 11/16 in; Filter Cartridge Media Polypropylene; Filter Flow Rate 20.0 gpm; Max. Temp. 160 Degrees F; Filter Reduces Particulates; Max. Pressure 35 psi; Application Chemical-Handling, Membrane Prefilter; Inside Dia. 1 1

3) KAREI-PTFE-01HL-250-S2C-EX-VR-RPG (PTFE, 0.1 um, Hydrophilic PTFE for liquid application, 250mm, SOE, 222 Viton O-Ring with extended adaptor and stainless steel reinforcement ring, Closed end, Reinforced P.P. with glass parts material)

FMT-45. Medium turbidity. Contains 300 cm² of high quality polyethersulfone 0.45 micron filter media. Provides the user with a more economic option for field filtration when lower turbidity is encountered. FHT-45. High turbidity. Contains 600 cm² of high quality polyethersulfone 0.45 micron filter media. Type.

Millipore LCR (Hydrophilic PTFE) with Glass Fiber Pre-filter 0.45 LCR 100 mL 50 SLCRM25NS 1000 SLCRM25NK 0.2 0 LG 100 mL 50 SLLGM25NS 1000 SLLGM25NK Durapore (PVDF) Membrane and Glass Fiber Pre-filter 0.45 HV 100 mL 50 SLHVM25NS 200 (8 x 25) SLHVMZ5NZ 1000 SLHVM25NK Nylon Membrane and Glass Fiber Pre-filter

Our Fluoropore™ membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications. Fluoropore™ membranes provide broad chemical compatibility, high flow rates and consistency.