high flow rate 0.45 um ptfe filter exporter

Membranes Filter Nylon pore size 0.2 um Dia 47mm,plain 100/pk 1624/2 7402-009 Membranes Filter Nylon pore size 0.45 um Dia 47mm,plain 100/pk 1625 7404-004 MEMBRANE FILTER NYLON PORE SIZE 0.45UM, DIAMETER 47MM, PLAIN 100/PK

Water Flow (mL/min/cm 2 @ 0.7 bar/10 psi) Applications Unsupported polyvinylidene fluoride Fluorodyne II 0.1 29.0-36.0* 2.0-2.48 N/A Sterile filtration Unsupported polyvinylidene fluoride Fluorodyne II 0.2 17.5-22.0* 1.21-1.52 N/A Sterile filtration 0.45

•Provide regular size sterile syringe filter: 0.22 μm and 0.45 μm PTFE syringe filter •Unconventional size 0.1 μm, 1 μm, 3 μm, 5 μm, 10 μm •Sterile hydrophobic PTFE syringe filter •High flow rate at a low inlet pressure •Low extraction and excellent thermal stability

Durapore® Membrane Filter, 0.45 µm 0.45 µm pore size, hydrophobic PVDF, 142 mm membrane; find Millipore-HVHP14250 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich. General description Durapore ® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility.

Durapore® Membrane Filter, 0.22 µm Background Information Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore® membrane binds far less protein than nylon, nitrocellulose, or

High-Flow Asymmetric PES Nylon, PTFE, High-Flow Asymmetric PES Pore Sizes 0.1µm, 0.2µm, 0.45µm 0.2µm 0.2µm, 0.45µm Best Used for General filtration of cell cultures and media for preparation or sterilization Thick, viscous or time-sensitive media

Low pressure drop and high flow rate due to high filtration area of 0.7 m 2 Per 10” cartridge. Absolute rated. Autoclave or in situ steam sterilization features. Integrity test is possible. FDA approved.

Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17576 with a pore size of 0.45 µm can be used for sample preparation. All materials of this filter element meet the requirements of the

Membrane Filter Selection Guide Membrane type Micron rate (um) Largest roll Width (mm) Thickness Flow Rate Bubble Point Maximum Work Temp ? Waterproof pressur Forward Maximum Operating Pressur Aerosol Retention?0.3µm D Nylon 0.22 300 0.09-0

High Efficiency 20" PP Pleated 0.45 Micron Filter Cartridge For Plating Solutions PP pleated micron filter cartridge for water filtration General Description: Pleated filter cartridges deliver high efficiency and consistent filtration of fluids in a

2020/2/17 · Strong acid solvents filtration, with an excellent flow rate Alkali solvents filtration Compatible with gaseous samples Can handle high-temperature liquids Stock List of 0.22/0.45micron PTFE Hydrophobic Syringe Filter

Recommended when maximum recovery is important. Durapore™ PVDF Membranes: 0.45μ Pore Size provide high flow rates and throughput, low extractables, broad chemical compatibility and low protein binding. Available in diameters ranging from 13mm to 142mm.

FILTER - LAB ® catalogue 2017 Pages 100 - 101 Code MPP045025N Pore 0,45 µm Thickness 0,170 – 0,200 mm. Surface Smooth Bubble point with alcohol (mínimum value ) 0,11 bar / 11 Kpa Flow rate with alcohol 25ºC (p=0,7 bar) ≤ 140 ml/min/cm²

PTFE PVDF PET MV CA PA PES Macherey - Nagel 0,45 um filters pore size 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 diameter 25 mm 25 mm 25 mm 25 mm 25 mm 25 mm 25 mm 25 mm pack quantity 50 pieces 50 pieces 50 pieces 50 pieces 50 pieces

Filter Diameter 50 mm Effective Filtration Area PTFE membrane - 19.6 cm 2 Emflon II membrane - 20 cm 2 Typical Air Flow Rates 0.2 µm: 8 Lpm at 0.2 bar (20 kPa, 3 psi) 0.45 µm: 12 Lpm at 0.2 bar (20 kPa, 3 psi) 1 µm: 15 Lpm at 0.2 bar (20 kPa, 3 psi)