Common use ptfe 0.45 micron filter VWR

PTFE membrane and polypropylene housing have broad chemical compatibility. In-line filters can be used to help protect against bloodborne pathogens. They are useful for benchtop fermentors, in-line gas filtration for sterile air or CO2, and protection of vacuum pumps from damage by aqueous solutions.

They are available with 0.2 µm or 0.45 µm membranes. These membranes are certified to meet EPA requirements for water quality work, and pass ISO7704 testing. Nalgene reusable filter holders with receiver and reusable bottle top filters can also be used to analyze bacterial or microbial analysis. Since they are reusable and autoclavable, they also

Avantor ®, a Fortune 500 company, is a leading global provider of mission-critical products and services to customers in the biopharma, healthcare, education & government, and advanced technologies & applied materials industries.

15 mm PTFE PP 0.45 μm Male Luer Slip White, Printed No 500 17574-----Q 4 mm PTFE PP 0.2 μm Male Luer Slip Blue Tray No 500 17844-----Q 4 mm PTFE PP 0.45 μm Male Luer Slip Yellow Tray No 50 1 -----K 4 mm PTFE PP 0.45 μm Male Luer Slip Yellow Tray No 500 1 -----Q

Remember my country selection and make that my default destination when visiting vwr.com.

These 0,2 and 0,45 µm centrifugal filters are used for particulate removal, sample clarification or pre-filtration clean-up of large agarose or acrylamide gel debris prior to further purification with a MWCO device.

Autofil is available as either a complete system or as a bottle-top filter. Both options have an upper filter funnel with a dust cap that contains a 0.1μm, .2μm (sterilizing grade) or 0.45μm (clarification grade) asymmetric PES membrane filter. Our membrane is low protein binding and surfactant-free.

Available with either PP, PTFE or nylon membrane. Membranes are available in either 0,2 or 0,45 µm pore size, with the choice often made on analytical column packing size. If the column packing size is larger than 3 μm then use 0,45 μm, and if 3 μm or smaller then use 0,2 μm. Suitable for HPLC: Low levels of UV-detectable extractables

66149 TF-450 (PTFE), 47 mm Recommended for use with all organic liquids 0.45 µm 100/pkg 66155 TF-1000 (PTFE), 47 mm Recommended for use with all organic liquids 1 µm 100/pkg 66602 Nylaflo (nylon), 47 mm Not recommended for use with acidic solutions 0.2 µm 100/pkg 66608 Nylaflo (nylon), 47 mm Not recommended for use with acidic solutions 0.45

VWR Quantitative Filter Paper 6 Essential Supplies and Laboratory Consumables Filtration - Flasks Non Sterile, 0.45 μm PTFE, UniFlo, 25 mm 500 Whatman WHAT10463422

Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered.

0.2 PTFE Polypropylene 721-1320* 100 0.45 PTFE Polypropylene 721-1345* 100 25mm diameter for 10-100 ml volume, Leur-Lok inlet, male slip outlet 0.2 PTFE Polypropylene 728-2020* 500 0.45 PTFE Polypropylene 728-2045* 500 * autoclavable

Learn more about Syringeless Filters. We enable science by offering product choice, services, process excellence and our people make it happen.

4472 Acrodisc CR PTFE, 0.45 µm, 4 mm 250/750 4552 Acrodisc CR PTFE Minispike, 0.2 µm, 13 mm 100/300 4423 Acrodisc CR PTFE, 0.2 µm, 13 mm 100/300 4553 Acrodisc CR PTFE Minispike, 0.45 µm, 13 mm 100/300 4422 Acrodisc CR PTFE, 0.45 µm, 13 mm 100/300 4225 Acrodisc CR PTFE, 0.2 µm, 25 mm 50/200 4219 Acrodisc CR PTFE, 0.45 µm, 25 mm 50/200

Syringe Filters Merck Millipore Millex™-GP Sterile Syringe Filters with PES Membrane Ready-to-use, syringe-driven units designed for sterilizing and clarifying sterile solutions