Common use ptfe 0.45 micron filter Porex

POREX Virtek PTFE Protection Vents STOCK PRODUCT OFFERING - ADHESIVE DISCS Available Options and Codes Standard Acrylic Adhesive: -40 to 85 C continuous. Approx. 190 micron thick High Temperature Adhesive (H): -40 to 150 C continuous.

15 mm PTFE PP 0.45 μm Male Luer Slip White, Printed No 500 17574-----Q 4 mm PTFE PP 0.2 μm Male Luer Slip Blue Tray No 500 17844-----Q 4 mm PTFE PP 0.45 μm Male Luer Slip Yellow Tray No 50 1 -----K 4 mm PTFE PP

Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45

Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common

• Inert PTFE and polypropylene components provide extremely wide chemical compatibility, and permit use in a broad range of fluids and applications • Absolute ratings of 0.05, 0.1, 0.2, 0.4, 1.0 and 5.0 micron deliver precise particle retention at rated level

syringe filters with PTFE, nylon, PVDF, and GHP membrane to be low in UV absorbing extractables. They have been ®tested for compatibility with common HPLC solvents (water, acetonitrile, and methanol) using established HPLC procedures. Filtrate from

0.05 μm, 0.1 μm, 0.2 μm, 0.45 μm, 5 μm, 10 μm Filter Configuration ABD1 Nominal Filter Areas 1.1 m 2 / 12 ft 2 Maximum Operation Temperature 60 ˚C / 140 ˚F Maximum Forward / Reverse Differential Pressure 0.34 MPa @ 60 ˚C / 49.3 psid @ 140 ˚F

Sterile Membrane Filters 0.45 found in: Non-Sterile Mixed Cellulose Esters Membrane Filters - White, 0.45µm, Non-Sterile Mixed Cellulose Esters (MCE).. Polyethersulfone (PES) membrane for high flow and low binding Two membrane pore sizes: 0.22µm or 0.45µm Filter systems include bottle top filter and solution bottle with cap Bottle top filters fit standard 45mm threaded solution storage

In-Line Filters. Disposable, multipurpose in-line filters are designed for the purpose of small-volume venting of solvents and for gas filtration. PTFE membrane and polypropylene housing have broad chemical compatibility. In-line filters can be used to help protect against bloodborne pathogens. They are useful for benchtop fermentors, in-line

TF (PTFE) Membrane Filter Media/Support PTFE with PMP (polymethyl-pentene) support ring PTFE on a polypropylene support Typical Thickness 1 μm: 76 μm (3 mils) 2 μm: 46 μm (1.8 mils) 3 μm: 30.4 μm (1.2 mils) 0.2 μm: 139 μm (5.5 mils) 0.45 and 1 μm:

Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are.

30 列 · 0.125″ PTFE 10 – 45 Microns 9″ X 9″ No POR-102074 0.125″ Polypropylene 80 – 155 microns

VWR® Glass Fiber Filters. Supplier: VWR International. Description: Binder-free VWR® glass fiber filters feature fast flow rates, high-loading capacity, wide thermal tolerance, and excellent precipitate retention. Certificates. ,28333-135PK,28297-976PK,28297-510PK,28333-129PK,28333-133PK,28333-137PK,28297-508PK.