Whatman ptfe membrane filter 0.2 um for minerals

Whatman Polycap TF capsule filters from Cytiva are made with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polyproplyene housing for use with organic solvents and chemically aggressive solutions. PTFE filter membrane is resistant to most solvents. Available in 0.1, 0.2, 0.45, and 1.0 µm pore sizes.

Whatman Syringe Filters. (Use Sterile Filter and Membrane with Pore Size 0.2 ... 6875-2502 PTFE 0.2 1500 6874-2504 PTFE 0.45 150

Product Name. 28420775. PTFE Membrane, WTP Range, 0.2 µm pore size, 25 mm circle (100 pcs) 28420776. PTFE Membrane, WTP Range, 0.2 µm pore size, 47 mm circle (100 pcs) 28420777. PTFE Membrane, WTP Range, 0.5 µm pore size, 47 mm circle (100 pcs) 28420778. PTFE Membrane, WTP Range, 1 µm pore size, 25 mm circle (100 pcs)

Air and gas filtration use the hydrophobic characteristics of PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 μm and 0.5 μm. Venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 μm membranes.

Mineral-oil bubbler. Product Number Whatman ® PTFE membrane filters. Whatman ... PTFE membrane circles, (TE 35), 0.2 μm, 47 mm, 50/pk:

Innapropriate filter size will can cause a filter to plug prematurely. Filter pore size is chosen based on the application. If the application requires a sterile fluid, than a 0.22 micron membrane would be used for standard solutions that have bacterial bioburden. A 0.1 micron filter would be used for applications where mycoplasma is a concern.

The 0.5 μm pore size is normally used. Air and gas sterilization make use of the hydrophobic characteristics of PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 μm and 0.5 μm. Sterile venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 μm membranes.

Air and gas sterilization* make use of the hydrophobic characteristics of PTFE membrane filters and their ability to stop aqueous aerosols. Pore sizes of 0.2 µm and 0.5 µm are typically used. Sterile* venting of vacuum manifolds, fermentation vessels, and filtrate tanks and containers utilize PTFE 0.2 µm membranes.

UNIFLO 13/0.2 PTFE 1000/PK. Subscribe to get notified about product launches, special offers and news.

Cytiva's Whatman™ 2802T Polycap™ TF 150 Capsule Filter, Membrane: PTFE, Pore Size: 0.2µm, Inlet/Out

Pierce Nitrocellulose Membranes, 0.2 m, 8 x 8 cm, have excellent binding properties for western blotting, dot-blot assays, and other protein or nucleic acid methods. The 0.2-m pore size is ideal for the transfer of low molecular weight proteins (20 kDa) and nucleic acids (300 bp).See all membranes F

Membrane Filters 0.2 found in: Non-Sterile Mixed Cellulose Esters Membrane Filters - White, 0.20µm, Membrane Filter, 0.2 um, Non-Sterile, Bag 10, Filter..

Description: Whatman PTFE membranes from Cytiva are strong hydrophobic membrane filters resistant to the corrosive solvents and aggressive media used in gas steri Certificates ,28454-430BX,28454-418BX, 8-532PK,28454-450BX,28454-470BX

Whatman 7582-004, PTFE MembraneWhatman 7582-004, PTFE Membrane, WTP Range, 0.2 um pore size, 47 mm circle (100 pcs)Whatman product code 7582-004Filter MediaPTFEParticle Retention Rate0.2 umDiameter or Size L X W47 mmThickness130 umFlow Rate61.4 ml/min/cm^2Pack Size100

The 0.5 μm pore size is normally used. Air and gas filtration use the hydrophobic characteristics of PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 μm and 0.5 μm. Venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 μm membranes.