Waters 0.2um syringe filter for sterilization

This PVDF membrane works well with both aqueous and organic solvents

Syringe filters with different pore size ratings are suitable for different applications. For example, syringe filters containing 0.45 μm are typically used for HPLC sample preparation and 0.2 μm is used for UHPLC. In life science applications 0.1 and 0.2 µm pore sizes provide sterilization of buffers, culture media, and additives.

Applications of 0.45/0.2um MCE Syringe Filters. •Analysis and determination of particles and oil-insoluble matter in solution, and determination of water pollution index. •In the pharmaceutical industry, water injections that require autoclaving, and large infusions to filter out particles. •It is applied to research departments such as

Sterilization Integrity Testing Fit for Use 8 Elements of a Sterile Filtration Validation Sterile Filter Master Plan Prove the filter meets all requirements within product & process conditions. Prove the filter does not adversely affect the process stream. Prove the sterilization method is effective and does not compromise the filter.

Minisart® RC25 Syringe Filter 17764----------K, 0.2 µm Regenerated Cellulose. Minisart ® RC with hydrophilic regenerated cellulose (RC) is optimized for aqueous liquids and solvents with a pH of 3 - 14 and is stable against DMSO. Type 17764 with a pore size of 0.2 µm can be used for sample preparation and has a male luer slip outlet.

Jun 26, 2014 · What that means is, for the purpose of sterilization, 0.2 micron and 0.22 micron filters are indistinguishable. Their performance is the same, only the difference being the designation of their pore size rating. The real measure of filter’s ability to sterilize fluid is passing the test described in ASTM F838-05, Standard Test Method for

Sep 28, 2016 · Introduction. Contamination of your sample by syringe filters is an issue that is not commonly discussed. To find out the effect we ran some experiments looking at how much contamination we received on passing Type I deionised water and 2% nitric acid through a syringe filter.

Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the cartridges remove fragments that would otherwise

Sterilization (2) Pre-sterilized, subject to a minimum of 25 kGy of Gamma-irradiation (2) •P r e-st ilz dM nK pak y g f mu o b • Mini Kleenpak syringe filters must not be sterilized in-situ by passing steam under pressure Op era ting P m s (1) Maximum Operating 5.4 bar (80 psi) at 20 °C Temperature and Pressure 2.1 bar (30 psi) at 60 °C

PTFE Vent Filter, Sterile, 0.2 Micron, 50mm, 6 to 12mm hose BARB, 10/Pk. Easy-to-use, sterile ,and disposable, these In-Line Filters contain a hydrophobic PTFE membrane ideal for confining and isolating infectious and hazardous material in vacuum systems and venting applications.

Sterile Syringe Filter, PVDF, 25mm diameter, 0.2um, Individually Packaged, 10/pk 1.0 out of 5 stars hard to get plain water ... is done during the sterilization ...

Whatman 6993-2504 GD/XP Syringe Filter, depth polypropylene filtration medium, 0.45 um (1500 pcs) Regular Price: $2,560.56 Price $2,226.58