USA ptfe 0.2 micron filter for healthcare

Capsules and in-line filters are designed for filtering certain gases or liquids. Choose from disposable or reusable filters for general or specialty uses. When selecting a filter consider the filter media, chemical compatibility, airflow rates, water flow rates, if you need sterile filters, filtration area, filter dimensions, and pore size

Installing 0.2 micron biological point-of-use (POU) filters on any showerheads or sink/tub faucets intended for use POU filters protect only the connected fixture. Correct location selection is critical to Legionella exposure prevention across the water system.

In-line Filters In-line filters protect your vacuum pump and outlet gas environment. Easy-to-use sterile and disposable in-line filters contain a hydrophobic PTFE membrane. Ideal for confining and isolating infectious and hazardous materials in vacuum systems and protecting your laboratory.

PTFE Membrane Disc Filters - 2 µm, 47 mm (50/pkg) Product ID. R2PJ047. Material. PTFE with PMP (polymethyl- pentene) support ring. Air flow rate (0.7 bar (70 kPa,10 psi) 53 L/min/cm². Diameter. 47 mm.

PTFE membrane and polypropylene housing have broad chemical compatibility. In-line filters can be used to help protect against bloodborne pathogens. They are useful for benchtop fermentors, in-line gas filtration for sterile air or CO2, and protection of vacuum pumps from damage by aqueous solutions.

0.2 Micron, 90mm, PTFE Unlaminated Membrane Filters. 10/Pk. PTFE Unlaminated. $89.24. + -. Add to Cart. Our unsupported, hydrophobic, PTFE membrane filters are ideal for sterilization and venting applications involving air, gasses, and solvents/acids incompatible with most other filters. These filters are ideal for your labs operations and tasks.

Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common

PTFE Laminated Membrane Filters, 0.2 Micron, 47mm, 100/Pk. PTFE Laminated Membrane Filters, 0.20 micron, 47 mm, pack of 100. Hydrophobic, durable ePTFE laminated on to a polypropylene later. Ideal for venting, phase seperations, and aerosol sampling.

Whatman® Puradisc 25 syringe filters 0.2 μm, PES sterile, 50/pk; Synonyms: Whatman filter,disposable syringe filters,Z744611,Whatman filters; find -WHA67802502 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich

These Corning® syringe filters have polypropylene copolymer housings, hose barb inlets and hose barb outlets. PTFE membranes provide the best chemical resistance These naturally hydrophobic membranes can be used for venting applications or filtering gases 100% integrity tested, sterile and nonpyrogenic and noncytotoxic Manufactured in accordance with ISO 9001 standards

Utilizing Advanced Pleat Technology (APT), our LifeASSURE™ EMC Series Filter Cartridge provides enhanced flow characteristics with minimal pressure drop. This filter is available in single and multiple length cartridges with 0.1, 0.2, 0.45, 0.65 and 0.80µm ratings along with various end modifications. The naturally hydrophilic Nylon 6,6

Available in 0.2, 0.45, 0.8, 1.2, and 5 µm pore sizes; Color-coded housings allow easy identification of pore size and membrane; Easy to use. Double luer-lock design offers safe and secure needle placement; PharmAssure 25 mm Vent Filters Protects patients and health care professionals with sterile hydrophobic barrier. Easy to use.

stress to maintain optimal flow. 0.2 micron filters remove all bacteria 0.45 and 0.8 micron filters for particle removal and fluid clarification Ergonomic design 1 1/2 turn screw cap, tapered sides and “grips” make the filter units and storage bottles easy to handle

Filling/breather filters from HYDAC prevent contamination and water from the surroundings from entering the system in connection with fluctuations of the oil level in the tank (tank breathing). FEATURES: Tank mounting filter. For separation of solid particles and water. Through-put volume up to 15,000 l/min (with Dp=0.01 bar) Optional. - lockable.

524 aPES Filter Unit. housing 50 mm Supor® machV PES membrane 115 mL capacity The 524 is an economical asymmetric polyethersulfone filter unit that is suitable for small-volume benchtop filtration. Wide, stable base design. Pore size (0.2 µm) and membrane type are printed in easy-to-see Blue on the side of each unit.