USA 0.2 um ptfe filter with high quality

Sartofluor® Air Filters: In Stock and Ready to Move. Sartofluor ® air filters are especially suited to demanding venting applications with high volume gas streams, extreme humidity, and stringent Steam-In-Place regimes. The hydrophobic PTFE membranes and further components used in Sartofluor ® filters offer reliability, process security, and

0.2 μm micron ratings. • Filtration area from 0.16 m² to 1.04 m². • Available as 50 mm capsules, capsules or cartridges. • Assymetric polyethersulfone membrane with Advanced Pleat Technology construction. • Available in 0.2 and 0.45 µm. • 100% integrity tested prior to release. • Regulatory Support File.

WHA68702502 Whatman ® GD/X syringe filters Nylon membrane, pore size 0.2 μm, diam. 25 mm, non-sterile, pkg of 150 ea Synonym: Whatman filter, Z277355, syringe filter, syringe filters

Nominal and absolute micron retention ratings: 0.2 to 40 m. Memtrex* pleated membrane filters – absolute micron ratings for the ultimate in product safety and purity. Absolute micron retention ratings: 0.05 to 0.45 m. Available with PES, Nylon, PCTE, Polyproylene and PTFE membranes.

Acro® 50 Vent Filters Pall Acro 50 disposable filters are 0.2 micron rated and contain a Pall hydrophobic PTFE membrane and are ideal for the sterile venting of small containers and as an in-line gas filter. The large effective filter area provides high flow rates and filters can be autoclaved several times ensuring low costs.

Preloaded air sampling filter cassettes are a convenient way to collect air quality samples using a personal or area pump. They test for a variety of common contaminants and are available in multiple diameters and configurations for use with numerous types of attachments required for some applications.

ePTFE liquid filtration membrane is made of PTFE resin as a raw material, and is made into a polytetrafluoroethylene hydrophobic film by a special process and biaxial stretching, and then the original hydrophobic angle is changed to 34 ° C by special chemical and physical modification, thereby the membrane has the characteristics that the liquid can pass through a particle having a high

We offer unsupported PTFE filters for NIOSH-method 5013 testing, PTFE filters with laminated support for polynuclear aromatic hydrocarbon testing to NIOSH 5506 and 5515 standards, PTFE filters with a bonded PMP support ring for PM10 and PM2.5 dichotomous air sampling, and extra-durable PTFE filters with a laminated polypropylene support layer.

United States of America - 1-800-272-7537 Venezuela - +58 (2) 238 5422 tribution of high quality, critical flow, ... Fulflo® 1401 High Pressure Filter Cartridges

Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high Related Products: Hydrophobic Filter

PTFE Membrane Filters. Biopore Membrane Filter roll, Hydrophilic PTFE This Biopore membrane roll is hydrophilic, with a pore size of 0.4 microns. Milliseal Membrane Seal, PTFE, 18 mm This is a 18 mm Hydrophobic PTFE Membrane Filter with a 0.45 micron pore size. For use in Sterilizing filtration, bioassays, solvent filtration.

high-purity filters for life sciences processing; air filtration filters for turbine filters and air cabinets; and more. Materials science is the backbone of our product solutions, particularly related to ePTFE, the extraordinarily versatile material Bob Gore discovered in 1969 by expanding PTFE. Combining our advanced materials with our

HYDROPHILIC PTFE FEATURES: Hydrophilic PTFE membrane has good mechanical strength, tear resistance, the contact angle of less than 20 °, good bubble point , high porosity, high flow rate. HYDROPHILIC PTFE USED: Hydrophilic PTFE Syringe Filter widely used in sample pre-filtration, clarification, removal of particles, and liquids.

Depth Filters: Filter Sheets, AKS. Pall combines high performance features with high quality materials, ease of use and a wide selection of formats and material grades to make our depth filter product range the best choice for cell harvest, clarification and prefiltration process steps in Biotech, Food & Beverage & Laboratory segments.

Constructed of hard, durable first-surface dielectric coatings on optical-quality IR-transmitting substrates, these filters will withstand normal cleaning and handling associated with any high-quality optical component.