solvent compatibility ptfe 0.22 micron filter Acrodisc

HPLC certification assures that the filters will not add artifacts to your analysis; GH Polypro membrane is the best choice for filtering mobile phases; PTFE membrane provides the ultimate in chemical compatibility for filtering harsh chemicals and HPLC mobile phases “Pall Laboratory products are designed for laboratory applications only.

4472 Acrodisc CR PTFE, 0.45 µm, 4 mm 250/750 4552 Acrodisc CR PTFE Minispike, 0.2 µm, 13 mm 100/300 4423 Acrodisc CR PTFE, 0.2 µm, 13 mm 100/300 4553 Acrodisc CR PTFE Minispike, 0.45 µm, 13 mm 100/300 4422 Acrodisc CR PTFE, 0.45 µm, 13 mm 100/300 4225 Acrodisc CR PTFE, 0.2 µm, 25 mm 50/200 4219 Acrodisc CR PTFE, 0.45 µm, 25 mm 50/200

Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Pricing and Availability.

Choose Aijiren Captiva Premium Syringe filters for greater filtration speed and recovery than other filters of the same size. We understand the demands on chromatographers, so we've designed our syringe filters to make filtration fast, easy and and effective. Flow through volume of 15 mm syringe filters over time with particulate-laden samples

Syringe Filters Solvent Compatibility Chart 1 Protect any analytical system. 2 Extend LC column lifetime. 3 Achieve more reproducible analyses. 4 Variety of membranes, porosities, and diameters available. 5 Luer lock inlet provides strong, leak-tight syringe connection to withstand filtration pressure.

Acrodisc® Syringe Filter with wwPTFE membrane & wwPTFE Membrane Disc Filters, Pall. The “universal” membrane filter for all of your analytical filtration requirements. Avoid the expense and inconvenience of keeping a variety of filters on hand. Versatile filter for aqueous and aggressive organic solvent-based solutions.

Filtration is an integral piece of nearly every workflow of every lab. Whether its cell culture, protein research, water testing, bioprocess design, or QA/QC testing of beverages – filtration will play a role in your lab’s daily routine and Thermo Fisher Scientific has the tools you need.

Nylon Membrane Filters, 0.22 Micron, 300 x 3000mm, 1/Pk. Nylon membrane filter roll: 0.2 µm pore-size, 300 x 3000 mm. Hydrophilic, low-extractable, inert, durable material supported by an internal polyester web. Typically used for HPLC, microbiology, medical/clinical, and general filtration.

Dec 01, 2017 · Possibly even dirty drugs like Heroin gun powder, Black Tar Heroin, Powdered Meth, Crystal Meth, all diluted in solute then filtering with 0.45um or lower, recommended 0.22 Micron pore filter size. I read lab experiment write ups but they did not pertain to drug filtering, but they stated that PES filters particulates the same as PVDF does.

Acrodisc 25-mm syringe filters with 0.2-μm Supor membrane (Pall, cat. no. 4612) Cell preparation and in vitro culture Eppendorf Research Plus pipettes (p1000, p100, p10; Sigma, cat. no. Z683884)

Available in a broad range of membranes to meet sample compatibility requirements. The 25 mm Acrodisc is recommended for sample volumes from 5 to 100 mL. The 13 mm size is recommended for samples under 10 mL in volume. The 4 mm size is for samples under 2 mL. PP housing with Luer fittings.

Minisart® Syringe Filter, Polyethersulfone (PES), Pore Size 0.22 µm, Ethylene Oxide, Female Luer Lock, Male Luer Lock, Pack Size 50 Added to Shopping Cart Minisart ® High Flow with polyethersulfone (PES) is optimal for highest flow rates and a pH of 3 - 12.

Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common

Syringe Filter Chemical Compatibility Use the information in this table to determine the ability of a specific syringe filter membrane to withstand exposure to a solvent. All concentrations are 100% unless noted. LEGEND C = Compatible LC = Limited Compatibility (Membrane may swell and shrink) IC = Incompatible (Not Recommended)