Porex 0.2um ptfe syringe filter for laboratory vacuum filter system

Filtration. Filtration is an integral piece of nearly every workflow of every lab. Whether its cell culture, protein research, water testing, bioprocess design, or QA/QC testing of beverages – filtration will play a role in your lab’s daily routine and Thermo Fisher Scientific has the tools you need.

G50C filters can be used as a hydrophobic barrier to protect from viral and bacterial contamination. PTFE 0.2um and PE 0.2um rated filters can be used in sterile vent applications with extremely low resistance. Provides an ideal effective barrier for vacuum/vent protection from bio-hazardous contamination.

No. It is a common misconception that sterile air/gas filtration requires the use of a filter containing small pores. A 0.2 µm filter is required for sterile liquid filtration; however, this pore size is not necessary when sterilizing air or gas since the filtration mechanisms

300-0001-FLS: Vactrap™ Tubing Extension, 4 ft., w/ 0.2um PTFE Vent FilterFoxx Life Sciences’ Vactrap is the world’s most advanced vacuum trap system. Ideal for protection of vacuum lines and scientists alike, Vactrap safely contains waste from supernatant removal, chemical separation, and cell or tissue culture media aspiration.

PVDF Syringe Filter 13mmx0.45um/100 Limited Stock RM 863.00 Puradisc 25 NYLON Syringe filter 0.2um/100 Limited Stock RM 359.00 PTFE Syringe Filter 13mmx0.2um/100 s/pk Ready Stock RM 1,225.00 Syringe Filters 0.8um 100/bx Pre-order RM 1,927.00

Buy Syringe Filter in India at Biomall.in. Syringe filter is used for a fast and efficient filtration that gives a precise quantity of the filtrate. MUP 0.2uM PTFE 1000/PK 1,26,580.00 Brand: Whatman Catalog No.: UN503NPEORG Quantity/Unit: 1000/Pack 1-2 ...

25 mm Millex® syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in fine particle removal from organic solvents. Syringe filter consists of a membrane sealed in a high density polyethylene housing

Minisart® SRP15 Syringe Filter 17558----------K, 0.2 µm hydrophobic PTFE. Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17558 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration and has a male spike outlet.

Whether you need to separate and concentrate proteins and other biomolecules or collect and remove contaminants from air or liquid samples prior to downstream analysis, our broad selection of syringe filters, membranes, filter holders, and tangential flow and centrifugal filtration devices ensures we have the right solution for your application.

Technical Parameters of PP Syringe Filter Diameter 13mm 25mm Housing Material Polypropylene Membrane Material PP Pore Size 0.1um, 0.22um, 0.45um, 0.8um, 1.0um Maximum Temperature ≤50 Inlet Connection Female luer lock Female luer lock Outlet

Captiva syringe filters are typically used to prepare small-volume samples for HPLC and ion chromatography. They allow for high flowrates and loading volumes, and also extend column lifetimes considerably. Find out more here.

Syringe filter Minisart® SRP, PTFE. With a chemical-resistant, hydrophobic PTFE membrane for high purification of solvents or aggressive liquids in HPLC or GC analysis. Low adsorption. Show.

POREX® Virtek Medical PTFE Reusable Filters are made from medical grade PTFE, is the robust and reusable medical media with dual capabilities: a vent that allows pressure equalization during the sterilization process and a filter bacteria barrier forwith USP

Buy Whatman G2 Mini-UniPrep Filters, Clr, 0.2um, PTFE, SSC; 100/Pk and more from our comprehensive selection of Whatman Mini-UniPrep G2 Syringeless Filters Decrease sample preparation time and sample loss due to transferring containers All-in-one

Buy and get information for Vacuum-driven Filters PVDF hydrophilic membrane Pore size: 0.22µ 250 ml volume, VD14, Animal Cell Culture, Cell Culture Consumables, Filtration Aids, Vacuum-driven Filters, PVDF …