polypropylene housing ptfe membrane filter 0.22 um for sterilization

Jun 26, 2014 · What that means is, for the purpose of sterilization, 0.2 micron and 0.22 micron filters are indistinguishable. Their performance is the same, only the difference being the designation of their pore size rating. The real measure of filter’s ability to sterilize fluid is passing the test described in ASTM F838-05, Standard Test Method for

10”-30” 0.22 µm on a polyester web Membrane Durapore CVSC--TP3, Milligard Rigid Polypropylene Modified Spun-Bonded Polypropylene Silicone 0.22 µm RW19, 1.2 µm PVDF Multimedia and RW06, 0.5 µm Filter Membrane plus Cartridges Media Over Durapore MEC 10”-30” Hydrophilic 0.22 µm on a polyester web Membrane

Hydrophobic polyvinylidene for (PVDF) Acro 50 vent devices with Emflon® II Membrane. Housing: Polypropylene. Filter Diameter. 50 mm. Effective Filtration Area. PTFE membrane - 19.6 cm 2. Emflon II membrane - 20 cm 2. Typical Air Flow Rates. 0.2 µm: 8 Lpm at 0.2 bar (20 kPa, 3 psi)

Vent Filter - 50 mm. GVS Vent Filters are available with connectors 6-12 mm and are individually packaged either sterile or non-sterile. These devices are available with PTFE membranes, Polypropylene housing and 0.20 µm or 0.45 µm pore size. TDS.

AcroPak Membrane Filter Capsules have hydrophilic Supor® (polyethersulfone) membrane for low protein binding. 1/4-1/2” stepped hose barb inlet/outlet connections. Polypropylene housing with polycarbonate filling bell. Gamma sterilized. Endotoxin-free and USP Class VI-121°C. Ideal for

EZFlow 25mm, 47mm, and 90mm membrane disc filters are used to retain particles or microorganisms by surface capture. The membrane disc filters are available in 0.22µm or 0.45µm pore sizes. The Hydrophobic PTFE membrane is bonded to a polypropylene support and due to its extreme chemical Related Products: Ezflow Membrane

Filters are Triton-free and have a bidirectional membrane support and luer lock (15/25 mm dia) or stepped barbs (50 mm dia) inlet/outlet for a secure fit to the syringe. Membrane type and pore size are printed on each filter for easy identification.

This device features a PTFE membrane which is ideal for chemically aggressive solutions, reagents and organic solvents. This lightweight unit is particularly suitable for protective vents and for in-line filtration and isolation applications. The 1 μm device features a polypropylene prefilter for use with heavily contaminated samples.

0.1 μm and 0.22 μm Hydrophilic Filters Superior filters for the sterile filtration of biopharmaceutical liquids Data Sheet A trusted name in the industry for over 30 years, Durapore® sterilizing-grade 0.1 μm and 0.22 μm hydrophilic polyvinylidene fluoride (PVDF) membranes are low protein binding and provide sterility assurance, high

Durapore® 0.1 µm and 0.22 µm Hydrophilic Filters Superior filters for the sterile filtration of biopharmaceutical liquids A trusted name in the industry for over 25 years, Durapore sterilizing-grade 0.1 µm and 0.22 µm hydrophilic polyvinylidene fluoride (PVDF) membranes are low protein binding and provide sterility assurance, high flow rates

Millex MCE syringe filter is made up of hydrophilic mixed cellulose esters (MCE) membrane and is available in 0.22 µm, 0.45 µm and 0.80 µm pore sizes to suit your application needs. Housing of filter is made from a low-extractable polyvinylidene chloride (PVC). It is mainly used for analytical sample preparation. SKU and Pack Sizes:

These Costar® Spin-X® centrifuge tube filters have a 0.22 µm pore CA membrane-containing filter unit within a 500 µL capacity polypropylene microcentrifuge tube. Cellulose acetate (CA) membranes provide fast flow rates and low protein binding Ideal for removing bacteria, particles, or cells from liquids, HPLC sample preparation and DNA

Description. Thermo Scientific™ Nalgene™ syringe filters are built to meet your lab’s clarification and sterilization needs. Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications.

Hydrophobic PTFE Pleated Filter 0.1um, Compressed Air, Nitrogen Gas Solution manufacturer / supplier in China, offering Hydrophobic PTFE Pleated Filter 0.1um for Compressed Air and Nitrogen Gas Solution, Color Syringe Filter Lab Filter Sterilization Filter 0.22 um, Water Filter Cartridge Pleated Filter Cartridge Micron Filter Polypropylene Filter and so on.

Filter Type: D25 mm: Quantity per Pack: 1000: Pore Size: 0.22 µm: Sterilization: Sterile: Inlet / Outlet: Female Luer Lock / Male Luer Lock: Housing Material: Polypropylene: Wettability: Hydrophobic: Burst Pressure (psi) 87: Filtration Area (cm2) ≥4.9 cm2: Maximum Operating Temperature: 60 Degrees C / 140 Degrees F: Maximum Operating