polypropylene housing ptfe 0.2 micron filter Millipore

CHEMICAL. NYLON. PTFE. PVDF. PES. CA. RC. PP. GF. Acetic, Glacial 1) Chemical compatibility of the membrane and housing with your sample matrix ...

Housing. Polypropylene. Polypropylene. Polypropylene. Filtration area. 0.125cm2 <0.5µm. 0.2µm. • Aggressive and nonpolar solvents. PTFE.

Minisart® with PP housing is optimized for filtration prior to Minisart® SRP (Hydrophobic PTFE). 25 mm. PTFE. PP. 0.2 μm Male Luer Slip.

Regardless of the membrane filter material, always use a 0.2 µm pore size Nylon and PTFE (Teflon) membranes have broad chemical compatibility and can be ...

Non-Sterile, Hydrophilic Polytetrafluoroethylene (PTFE), 0.2 µm, Hydrophilic •Polypropylene housing material offers low levels of extractables and broad ...

Non-Sterile, Hydrophilic Polytetrafluoroethylene (PTFE), 0.2 µm, Hydrophilic •Polypropylene housing material offers low levels of extractables and broad ...

EZFlow® 0.2µm PTFE Vent Filter sold as a pack of five. These are non sterile and ideal for carboy hydrophobic venting and solvent filtration applications.

SLFG75010 MilliporeMillex-FG, 0.20 µm, hydrophobic PTFE, 50 mm · A 50 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane.

Results 1 - 24 of 248 Corning 431227 PTFE Sterile Syringe Filter with Hose Barb Inlet and Outlet, Membrane with 0.2 Micron, Polypropylene Housing, ...

Type 17844 with a pore size of 0.2 μm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version Q is a non-sterile 

They have a robust 25mm Ø housing of inert, low extractable, pigment free virgin polypropylene. A PTFE membrane is used to filter gases.

China Milli-Pore Filter 0.22 Micron PP PTFE Membrane Cartridge Air Filters with DOE/222/226/215 Configuration, Find details about China Millipore Air 

Housing. Polypropylene. Polypropylene. Polypropylene. Filtration area. 0.125 cm2 <0.5 µm. 0.2 µm. • Aggressive and nonpolar solvents PTFE.

Materials. Cellulose acetate membrane filter (0.45 μm or 0.2 μm pore size). PTFE air filter (0.2 μm). Polypropylene housing and filter support. Polycarbonate 

Results 1 - 30 of 194 A 50 mm diameter non-sterile syringe filter with a 1 µm filter pore size hydrophobic PTFE membrane. The 1 micron filter comes in a pack ...