Results 1 - 30 of 194 A 50 mm diameter non-sterile syringe filter with a 1 µm filter pore size hydrophobic PTFE membrane. The 1 micron filter comes in a pack ...
0.2µm. P45. 0.45µm. 01. 1µm. 03. 3µm. 10. 10µm. 30. 30µm. 2: Pore Rating. 6: Seals. A. Ethylene. Propylene. B. Silicone. C. Viton®. D. Nitrile. J. DOE PTFE.
0.2 µm. 100. VS0172. Visit us at www.sartorius.com/Vivaspin500 to get membrane and the plastic housing – allowing removal of the entire concentrated.
Resistant to almost all chemicals, very strong acids, cryoliquids, alkalis, aggressive organic solvents. Pore sizes 0.2 μm and 0.45 μm. Filter diameters 47
25 mm Polypropylene. Housing male luer. Pore Size. 0.2 μm. 0.45 μm The filter may be suitable for short term, non-critical use at room temperature.
Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing.
All our syringe filters are HPLC certified. Housing Material: Polypropylene Effective Filtration Area (cm2): 1.09 Pore Size (µm): 0.45 µm Holdup Volume (µl): <
biological fluids and gases is usually done with 0.2 or 0.22 µm pore filter disc filter has a PTFE membrane and poly propylene housing with hose.
PTFE Vent Filter, Sterile, 0.2 Micron, 50mm, 6 to 12mm hose BARB, Offers broad chemical compatibility with PTFE membrane and polypropylene housing.
Captiva syringe filters are typically used to prepare small-volume samples for is constructed with the highest-grade virgin polypropylene or MBS housing ...
These Corning® syringe filters have polypropylene copolymer housings, hose barb inlets and hose barb outlets. PTFE membranes provide the best chemical
(Use Sterile Filter and Membrane with Pore Size 0.2 µm) propylene housing with a prefiltration ... um has a coarse top layer meshed with.
variety of filter choices with a polypropylene housing utilizing the Hydrophilic Polytetrafluoroethylene membrane can be used for both.
PureFlo PTFE filter cartridges are well-suited for critical applications where superior flow and particle removal efficiency at 0.1 and 0.2 micron is
The HIGH FLOW TETPOR II is validated as a 0.2 micron sterilising grade filter in liquids through ASTM 838-05 and 0.01 micron in.