polypropylene housing 0.2 um ptfe syringe filter for sterilization

PTFE Vent Filter, Sterile, 0.2 Micron, 50mm, 6 to 12mm hose BARB, 10/Pk. Easy-to-use, sterile ,and disposable, these In-Line Filters contain a hydrophobic PTFE membrane ideal for confining and isolating infectious and hazardous material in vacuum systems and venting applications.

EZFlow® Syringe Filters. 33mm Syringe Filters are used for prefiltration, clarification, or fine particulate removal. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with polypropylene housing with a female.

Jan 08, 2017 · PTFE membranes are chemically resistant to nearly all solvents, acids and bases. The membrane has low extractable and good thermal stability. PTFE is hydrophobic and requires pre-wetting prior to use with aqueous solvents. Sterilization: Syringe filters can be sterilized by autoclave at 125° for 15 minutes.

Filters are Triton-free and have a bidirectional membrane support and luer lock (15/25 mm dia) or stepped barbs (50 mm dia) inlet/outlet for a secure fit to the syringe. Membrane type and pore size are printed on each filter for easy identification.

Polytetrafluoroethylene (PTFE) Housing: Polypropylene (PP) Operating Pressure Max. 2 bar - forward direction (29 psi - forward direction) Pore Size: 0.2 µm: Sterilization: Can be autoclaved at 121°C for 20 minutes (maximum 132°C). Multiple autoclave cycles are possible. However, the responsibility for reuse is with the operator.

Looking for Syringe Filter, 0.2 um, PTFE, PK50? Find it at Grainger.com®. With over 1.6M products and 24/7 customer service we have supplies and solutions for every industry.

Pall® 4542 Acrodisc Syringe Filters with PTFE Membrane, Pore Size 0.2 µm, Diameter 13 mm, Pack of 1000 . Filter Media: Hydrophobic PTFE; Housing: Polypropylene

Thermo Scientific Nalgene sterile syringe filters are ideal for sterilizing (0.2 micron) or clarifying biological solutions, such as cell culture and microbial media, reagents and additives, proteinaceous solutions, and buffers. PES (polyethersulfone) – Lowest protein binding and.

Polytetrafluoroethylene (PTFE) Housing: Polypropylene (PP) Operating Pressure Max. 2 bar - forward direction (29 psi - forward direction) Pore Size: 0.2 µm: Sterilization: Can be autoclaved at 121°C for 20 minutes (maximum 132°C). Multiple autoclave cycles are possible. However, the responsibility for reuse is with the operator.

Showing 1-30 of 200 results for" syringe filter 0.2 um" Advanced Search. Structure Search. PTFE membrane polypropylene housing: Pricing: WHA67831302: 0.2 μm: 13 mm

Minisart® SRP15 Syringe Filter 17558----------K, 0.2 µm hydrophobic PTFE. Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17558 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration and has a male spike outlet.

The 0.5 μm pore size is normally used. Air and gas sterilization make use of the hydrophobic characteristics of PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 μm and 0.5 μm. Sterile venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 μm membranes.

Thermo Scientific Nalgene syringe filters are built to meet your lab’s clarification and sterilization needs. Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications.

Please enter your username and password; Login. Forgot Username or Password? Login

The 0.5 μm pore size is normally used. Air and gas sterilization make use of the hydrophobic characteristics of PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 μm and 0.5 μm. Sterile venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 μm membranes.