polypropylene housing 0.2 um ptfe filter Waters

labForce® (a Thomas Scientific Brand) the device against overfilling, the labForce™ Pipette Controller is equipped with a 0.2 um PTFE filter. The filter, the pipette holder and the nosepiece are autoclavable. Includes a universal battery charger, an additional hydrophobic 0.2 µm filter and a two-position charging stand.

Our company is using the best quality raw materials under the guidance of skilled professionals, PP Housing Filter is highly demanded in the market. This product is widely appreciated around the market for its rigid construction, easy installation, moisture resistance and reliability. Send Inquiry. Ask A Question. (FH-03)

Find syringe filter 0.2 um and related products for scientific research at MilliporeSigma Lab water purification accessory ... PTFE membrane polypropylene housing ...

SAMP2GNNB. This 33 mm syringe filter with a Hydrophilic Nylon membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.2 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses. Millipore. pricing.

† Rigid polypropylene outer cage protects filter † All polypropylene one piece construction (except 0.2 micron) † Asymmetric polysulfone media used in 0.2 µm grade † Fast rinse-up to 18 Megohm-cm Performance Specifications Filter grades 0.2, 0.25, 0.45, 0.8, 2, 3, 5, 10, 30, 50, 100 µm Recommended change-out differential pressure1

PTFE Filter Cartridge - 0.2 micron. Rs 3,500 / Piece Get Latest Price. Length. 10 inch,also available in 5 inch,20 inch,30 inch,40 inch. Operating Conditions. 4.2 bar at 23 deg C And 1.5 bar at 80 deg C. Filtration Area. 5.8ft2 per 10 inch. Autoclaving.

UltraCap® Single-Use Capsule Filter Assembly The high capacity UltraCap® capsule filter from Meissner meets a wide range of critical application requirements for a single-use, high-flow, high-throughput filter system.

Syringe Filter 0.2 found in: 4mm Syringe Filter Ca 0.2um 100 / Pk, Syringe filter PES 25mm 0.2um 1000/pk, Syringe filter PVDF 25mm 0.2um 1000/pk, Syringe..

Filter Media: PTFE on a polypropylene support Housing: Polypropylene . Filter Diameter . 50 mm . Effective Filtration Area . 19.6 cm2. Typical Air Flow Rates . 0.2 μm: 8 Lpm at 0.2 bar (20 kPa, 3 psi) 0.45 μm: 12 Lpm at 0.2 bar (20 kPa, 3 psi) 1 μm: 15 Lpm at 0.2 bar (20 kPa, 3 psi) Maximum Operating Temperature . 130 °C (266 °F) at 1.0

The Membrane and Process Development Product line at Sterlitech includes a wide range of commercially available polymeric flat sheet membranes, as well as ceramic membranes, bench-scale cross/tangential flow test cells, and filtration equipment. Sterlitech also offers Custom Designed Skid Mount Membrane Filtration Systems.

PTFE Syringe Filters. PTFE syringe filters are hydrophobic and chemically resistant to all solvents, acids, and bases. PTFE does not impart any extractables to the filtrate. It's an ideal material for transducer protectors because it blocks water vapor. PTFE is ideal for filtering and de-gassing chromatography solvents.

Membrane Material PTFE. Housing Material Polypropylene. Pore Size (µm) 0.2. Filter Diameter (mm) 50. Effective Filter Area (cm²) 15.9. Connections 1/4" to 3/8" stepped barb. Max Pressure (PSI) 60. Description 50mm in-line disc filter, PTFE, 0.2um, 10/pk.

LifeASSURE™ BLA Series Filter Cartridges (PDF, 1.39 Mb) offer high performance as either final filters for spoilage organism removal, or as a pre-filter. In prefiltration, they are effective in prolonging the service life of LifeASSURE™ BA, BNA and BDA final filters and help protect other downstream membrane filters.

PerkinElmer. Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are.

Description Syringe Filters, 0.2 um Hydrophilic PTFE, 13 mm; 100/Pk. Key Features. Non-pigmented acrylic or polypropylene (PP) housings feature integral filter sealing to avoid the risk of contamination from pigments and adhesives. Each filter is clearly marked with membrane pore size. Housings have standard luer connectors; 50-mm filters