Phenomenex ptfe membrane filter 0.2um for solvents

Our filters are used for applications requiring 0.2 micron sterilization of air, gas, solvents and chemicals in life science industries. Validated PTFE Membrane Our LifeASSURE™ PFS series PTFE Filters use a hydrophobic polytetrafluoroethylene (PTFE) membrane, which helps minimize pore blockage from moisture in vent applications.

HPLC/GC solvents. Nalgene non-sterile syringe filters are designed for clarification and particle removal from samples for instrument analysis such as HPLC and GC. Sample Preparation for Chromatography Pore size (µm) Membrane Housing Catalog # #/Case 13mm diameter for 2-10 ml volume, Leur-Lok inlet, male slip outlet 0.2 PTFE Polypropylene 721

They are available in variety of membrane choices with 0.2 μm or 0.45 μm pore sizes, feature a polypropylene overmold housing, and include both sterile and non-sterile options. Whatman ® ReZist ® syringe filters are specifically designed to be resistant to organic solvents.

The membrane is laminated onto a nonwoven polypropylene support web for improved strength and handling and can be used at temperatures up to 120 degrees C. PTFE is the membrane of choice for use with aggressive solvents, liquids, and gases that can attack other membranes. It is resistant to most acids, alkalis, and solvents.

• ®Nylon and PTFE (Teflon) membranes • Wide selection of membrane sizes Phenomenex PTFE (Teflon®) and Nylon membrane filters offer excellent chemical resistance to almost all laboratory solvents and samples. They do not introduce unwanted plasticizers or contaminants into the sample or mobile phase. PTFE (Teflon®) and Nylon 66 membrane

Gas filters have 0.2(u)m pore PTFE membranes. Stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. Stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules.

Aug 04, 2008 · PTFE Membrane Filter,90mm, Hydrophilic,0.45µm,1pk/100pcs Price : US$492.46 Select Click for More Product number: SF13867 PTFE Membrane Filter,90mm, Hydrophobic,1.0µm,1pk/100pcs Quantity Discounts: Applied at Check Out Qty Unit Price 10-100 US$345.19 101-500 US$326.01 Price : US$383.54 Select Click for More Product number: SF13852 PTFE

PTFE Membrane Syringe Filters mdi Membrane Technologies Applications: Sample filtration for HPLC and other analytical instruments Filtration of organic solvents and chemicals Available sizes: 4 mm, 13 mm, and 25 mm Available Pore Sizes: 0.2 µm and 0.45 µm Inlet: Female luer-lock Outlet: Male luer slip

Chemical compatibility is a critical consideration when selecting the proper sample prep syringe filter for your application. This chart outlines the chemical compatibility of the most common syringe filters. The contact time was 24 hours at 20°C. Syringe Filter Chemical Compatibility Syringe Filter Chemical Compatibility Regenerated Cellulose

PTFE Vent Filter, Sterile, 0.2 Micron, 50mm, 6 to 12mm hose BARB, 10/Pk. Easy-to-use, sterile ,and disposable, these In-Line Filters contain a hydrophobic PTFE membrane ideal for confining and isolating infectious and hazardous material in vacuum systems and venting applications.

Regardless of the membrane filter material, always use a 0.2 µm pore size membrane filter as the final filter for any sterilizing filtration. The 0.2 µm membranes used in Thermo Scientific™ Nalgene™ filters have been tested and shown to retain 100% of a challenge of 1 X 107 cfu/cm2 Brevundimonas diminuta bacteria.

with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polypropylene housing for use with organic solvents and chemically aggressive solutions. PTFE filter membrane is resistant to most solvents Available in 0.05, 0.1, 0.2, 0.45, and 1.0 µm pore sizes 0.05 µm pore size capsules

The membrane is laminated onto a nonwoven polypropylene support web for improved strength and handling and can be used at temperatures up to 120 degrees C. PTFE is the membrane of choice for use with aggressive solvents, liquids, and gases that can attack other membranes. It is resistant to most acids, alkalis, and solvents.

Solvent Mixtures NY PTFE-L First Alternative Recommended Membrane 0.22 µm Tissues, Media, Buffers CA MCE 0.45 µm Biological Samples/Proteins PES PVDF-L 0.45 µm Hydrophobic PTFE < 3 µm Column ID Filter Size LC GC PP Hydrophilic NY ≥ 3 µm PTFE-L 13 mm Diameter Filter Diameter 2-10 mL 10-100 mL 25 mm Diameter Solvent Phenomenex l WEB: www

Neobits.com: Buy labForce - 1162F00 - Solvent Filtration Disposable Vacuum Bottle Top Filter, 0.2um Sterilizing PTFE Membrane, 1000mL, GL45 Thread, Polypropylene Housing, Non-Sterile