palstic 0.22um ptfe syringe filter for air

1.888.299.9907 My Quote My Cart

≥ 0.021 Pore Size, μm Please refer to Ordering Information. Bubble Point & Air Flow Rate (PTFE 0.22 μm, 0.01 μm for air & gas) Bubble Point: ≥ 900 mbar with 60/40% IPA/water Air Flow Rate: ≥ 25 L/min at 1 bar Maximum Operating Pressure Forward: 3.5

Syringe Filter, PTFE, 100’s/pack 13mm 0.22um 13mm 0.45um 25mm 0.22um 25mm 0.45um Syringe Filter, Nylon, 100’s/pack 13mm 0.22µm 13mm 0.45µm 25mm 0.22µm 25mm 0.45µm You may also like

PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. PTFE is the membrane of choice for use with aggressive solvents, liquids,

PTFE Housing Material PP PP PP Filter Diameter (mm) 13mm 25mm 30mm Filtration Area (cm 2) 1.09 4.08 4.9 Pore Size(μm) 0.22 0.45 0.22 0.45 0.22 0.45 Holdup Volume (μl) <20 <100 <100 Sample Volume (ml) <10 <100 <120 Maximum Operating 130 C

Minisart® Syringe Filter, Polyethersulfone (PES), Pore Size 0.22 µm, Ethylene Oxide, Female Luer Lock, Male Luer Lock, Pack Size 50 Added to Shopping Cart Minisart ® High Flow with polyethersulfone (PES) is optimal for highest flow rates and a pH of 3 - 12.

1,751 0.22um air filter products are offered for sale by suppliers on Alibaba.com, of which air filter accounts for 1%, water filters accounts for 1%. A wide variety of 0.22um air filter options are available to you, such as not available.

13mm 0.45/0.22um Hydrophilic PTFE Sterile Syringe Filter For Lab Use. Product description: PTFE syringe filter provides high flow rate, best chemical compatibility and low protein binding, ideal for aqueous solutions and solvents filtration, especially aggressive solvent as well as air filtration. Application : In addition to HPLC, syringe

Shroom Supply Syringe Filter - 0.22 μm - PTFE Sizes: 13 mm & 25 mm - Available in both 13mm and 25mm diameters. These autoclavable 0.22 µm micron syringe filters are made out of a hydrophobic PTFE and are 100% reusable. They are perfect for inserting

Introduction Microlab Scientific offers Hydrophilic PTFE Syringe Filters, Special ideals on the Hydrophobic PTFE Membrane. Hydrophilic PTFE Syringe Filters are suitable for both Aqueous and Organic solvent filtration. Hydrophilic PTFE syringe Filter is the same as the Hydrophilic PTFE Syringe Filter can be used under highly aggressive colloidal solutions.

4mm syringe filter could remove microorganisms, particles, precipitates, and undissolved powders larger than nominal pore size, such as 0.22 micron (μm). The 4mm syringe filter is non-pyrogenic and non-toxic. The special construction usually only allows 2ml liquid for filtration, so it's specially suitable for the small volume filtration.

Description Syringe Filters Hydrophilic PTFE 25MM 0.22um Micron PTFE is relatively stable material, it is suitable for water and a variety of organic solvents, resistant to all solvents, low solubility. It has the characteristics of high permeability, high air flux, high

Find 0.22 µm syringe filter and related products for scientific research at MilliporeSigma Product Number Product Description SDS CLS430624 cellulose acetate membrane, sterile, pore size 0.22 μm, membrane diam. 50 mm, funnel capacity 150 mL, case of 48

15/7/2021 · Syringe filter, non-sterile, PTFE Hydrophilic. Hydrophilic PTFE membranes are a unsupported membrane that ideal for HPLC and mixtures of aqueous and organic solvents. Use with both aqueous and organic solvents, along with their mixtures.Syringe filters are used for small volume filtration of liquids, gas and other material-specific applications.

Features: 【 Classification of PTFE Membrane】: PTEF membranes are mainly divided into two types, hydrophilic and hydrophobic. This membrane is PTEF hydrophilic membrane.【The differences between hydrophilic membrane and hydrophobic membrane