palstic 0.2 um ptfe filter VWR

Thumb Clamp: Celcon* plastic Feedline Sinker: PTFE Vacuum Port Adaptor, Membrane Seal Gasket, and Seal Gasket: Polyethylene Effective Filtration Area 10.2 cm2 Filter Size Accepts 47 mm filter Inlet/Outlet Connections Tapered inlet accepts 3.2 - 6.4 mm (1/8 - 1/4 in.) ID tubing; outlet seals to bottles with openings 17.8 - 48.3 mm (0.7 - 1.9 in.) OD

The filter housing materials, as well as the filter membrane must be compatible with the solutions being filters. Polystyrene (PS) is used in the filter funnels and storage bottles for the Corning plastic vacuum filters. This plastic polymer should only be used in filtering and storing nonaggressive aqueous solutions and biological fluids.

Minisart® SRP15 Syringe Filter 17573-----K, 0.2 µm hydrophobic PTFE Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17573 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration.

Sartofluor® cartridges are available in the optimum range of pore sizes – 0.45 µm, 0.2 µm and 0.1 µm. Dependable performance at every scale. Our scale-up philosophy does not stop at liquid filtration. Especially in air filtration, with its variety of applications and demands, different filter sizes are essential.

the device against overfilling, the labForce™ Pipette Controller is equipped with a 0.2 um PTFE filter. The filter, the pipette holder and the nosepiece are autoclavable. Includes a universal battery charger, an additional hydrophobic 0.2 µm filter and a two-position charging stand.

TF (PTFE) Membrane Filter Media/Support PTFE with PTFE support PTFE with PMP (polymethyl-pentene) support ring Unsupported PTFE PTFE on a polypropylene support Typical Thickness 0.5 µm: 178 µm (7 mils) 1 µm: 165 µm (6.5 mils) 2 and 3 µm: 152 µm (6 mils) 1 µm: 76 µm (3 mils) 2 µm: 46 µm (1.8 mils) 3 µm: 30.4 µm (1.2 mils) 140 µm (5

Filters, pipet holder, and nosepiece are autoclavable The Falcon® Pipet controller is supplied complete with a two-position charging stand, a universal battery charger, three batteries, two 0.2 µm hydrophobic PTFE filters, and two 0.4µm hydrophobic PTFE filters; additional filters are available seperately

25 mm Millex® syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in fine particle removal from organic solvents. Syringe filter consists of a membrane sealed in a high density polyethylene housing Filter is non-sterile,

PTFE Syringe Filter, 0.22μm, 30mm, Sterile • 229757 • Filters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives Female luer-lock inlet and male luer slip outlet Color coded by membrane type for easy identification PTFE (Polytetrafluoroethylene) Hydrophobic membrane has great temperature resistance Degassing/clarifying aqueous samples Strong

In order to protect the device against overfilling the FASTPETTE PRO is equipped with a 0.2 um PTFE filter. The filter, the pipette holder and the nosepiece are autoclavable. The FASTPETTE PRO is also supplied with the universal battery charger, an additional hydrophobic 0.2 um filter and a two-position charging stand.

Syringe filters, Acrodisc®, PTFE. Supplier: Pall Laboratory. Description: Exceptional chemical and temperature compatibility. Ideal for filtration of gas and organic solvents. Prevent spurious peaks on chromatograms allowing Sale. ,514-4009EA,516-7651EA,514-4232EA,514-4033EA,514-0184EA,514-0476EA,514-0478EA.

Acrodisc Syringe Filter with 0.2 um Supor Membrane 13 mm filter non-sterile 1000/pkg Disposable syringe filter with low protein binding membrane single use for contaminant removal from most aqueous solutions. Polyethersulfone membrane provides high throughput and fast flow rate. $1,659.46. Pall Filter 4701

Buy AcroPak™ 300 vent filter capsules at Pall shop. They offer excellent chemical compatibility and are highly recommended for the high airflow rates in bioreactor venting. 0.2 µm, AcroPak™ 300 Vent Filter Capsule with PTFE Membrane | Pall Shop

Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common

Contact VWR Custom Manufacturing Services at 1.800.932.5000 or VWRCustom@vwr.com. e-Commerce / mobile technology solutions In addition to vwr.com, VWR, part of Avantor offers a state-of-the-art technology solutions portfolio.