Pall 0.22 um syringe filter for laboratory vacuum filter system

Buy membrane filters, syringe filters, capsule filters, mesh filters and many more microfilter membrane devices

HPLC sample filters in syringe filter format; Solvent filters in membrane disc format; Solvent filtration apparatus; A wide selection of membrane types and pore sizes to deliver the right lab filter for any sample type, and a broad range of device sizes to ensure complete sample filtration with minimal sample loss. Pall Laboratory products are

Pall supplies both sterile and non-sterile syringe filters that can be used across a range of laboratory methods. The comprehensive family of Acrodisc syringe filter products that Pall supplies gives laboratory scientists a wide selection to choose from, helping customers obtain the best possible results for their demanding applications.

These 25 mm syringe filters offer an available prefiltration layer and wide choice of filter media.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the

In-line Filters In-line filters protect your vacuum pump and outlet gas environment. Easy-to-use sterile and disposable in-line filters contain a hydrophobic PTFE membrane. Ideal for confining and isolating infectious and hazardous materials in vacuum systems and protecting your laboratory.

Looking for laboratory equipment? Find Hamilton lab equipment here. Hamilton Company offers laboratory products including syringes, needles, HPLC columns, pipette and pipettors, microlab 600, GC septa, valves, fittings, tubing, and lab sensors and accessories.

Use to protect vacuum systems and pumps from aerosol corrosion. Molded indication of flow “IN” port. They can also help protect work areas from pathogen contamination and hazardous vacuum pump exhaust or venting; and can help filter aggressive solvents in volumes beyond syringe filter capacity.

The Vented Millex ®-GV filter unit SLGVV255F are syringe filters for sterilization of low volume aqueous solutions for direct patient care applications, where venting and low protein binding membrane are required or desired. Application A 25 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane.

Saves time and money with fewer filter changes per sample volume; 142 and 293 mm discs feature printed tab for instant recognition of pore size and lot number “Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications.

GE Whatman Laboratory Filtration Guide. Select an optimal configuration from the variety of filter configurations from Whatman for cellulose and glass filters. Whatever you need to filter, Whatman has it covered. GE Whatman Laboratory Filtration Guide (1.1 MB)

PTFE membrane and polypropylene housing have broad chemical compatibility. In-line filters can be used to help protect against bloodborne pathogens. They are useful for benchtop fermentors, in-line gas filtration for sterile air or CO2, and protection of vacuum pumps from damage by aqueous solutions. These filters are autoclavable for easy

Sartolab® RF Vacuum Filtration Units Sartolab® 180C2-----E, 0.22 µm Polyethersulfone, 500 ml Sartolab ® RF with polyethersulfone (PES) is designed for cell culture media and other solutions. Type C2 is a bottle top unit including receiver flask (RF) with a pore size of 0.22 µm and a volume of 500 ml.

Hydrophilic filters can be wetted with virtually any liquid, and are the preferred filters for aqueous solutions, as appropriate by compatibility. Once wetted, hydrophilic filters do not allow the free passage of gases until the applied pressure exceeds the bubble point and the liquid is expelled from the pores of the membrane.

Innovative Bottle-Top Filters for Fast Vacuum Filtration of 100 mL to 5 L of Aqueous Solutions. Vaccum Filtration Made Easy. Explore how VacuCap filter unit can: Replace current vacuum filter systems; Simplify workflow; Maximize filtration; Filter faster. Supor® membrane provides high flow rates. No need to constantly refill upper fluid reservoir.

Filtration is an integral piece of nearly every workflow of every lab. Whether its cell culture, protein research, water testing, bioprocess design, or QA/QC testing of beverages – filtration will play a role in your lab’s daily routine and Thermo Fisher Scientific has the tools you need.