Minisart 0.2 um ptfe filter for venting

Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm A 50 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane. Comes in a pack of 10. - Find MSDS or SDS, a COA, data sheets and more information.

Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 1757A with a pore size of 0.2 µm can be used for sterile venting. It has hose barb outlet. Version Q is a non-sterile bulk pack.

Jun 01, 2011 · Midisart 0.45 μm filters have a minimum bubble point of 0.9 bar, and 0.2 μm filters have a minimum bubble point of 1.4 bar. Figure 2 shows the individual results of the trials where the 0.45 um

Minisart Air, for sterile venting and gas filtration, validated, non-sterile, gamma-irradiatable PTFE membrane, pore size 0.2 µm, connector inlet: Female Luer Lock. Related Products: Syringe Air Filter

Minisart SRP15 Syringe Filters by Sartorius Minisart SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14 Can be used for sample preparation and sterile filtration

Pall Acro 50 disposable filters are 0.2 micron rated and contain a Pall hydrophobic PTFE membrane and are ideal for the sterile venting of small containers and as an in-line gas filter. The large effective filter area provides high flow rates and filters can be autoclaved several times ensuring low costs.

Minisart® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17575 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version K is a non-sterile pack of 50. Units can be sterilized by autoclaving or EO.

PTFE Unlaminated Membrane Filters, 0.2 micron, 25mm, 50/pk Product code PTU022550 PTFE Unlaminated Membrane Filters, 0.2 micron, 25mm, 50/pk - PTU0 JavaScript seems to be disabled in your browser.

Minisart® SRP (Hydrophobic PTFE) 25 mm PTFE PP 0.2 μm Male Luer Slip White, Printed Yes 50 17575-----ACK 25 mm PTFE PP 0.2 μm Male Luer Slip White, Printed No 50 17575-----K 25 mm PTFE PP 0.2 μm Male Luer Slip White, Printed No 200 17575-----S

Our filters are used for applications requiring 0.2 micron sterilization of air, gas, solvents and chemicals in life science industries. Validated PTFE Membrane Our LifeASSURE™ PFS series PTFE Filters use a hydrophobic polytetrafluoroethylene (PTFE) membrane, which helps minimize pore blockage from moisture in vent applications.

Minisart filters have a Luer Lock inlet and outlet, for positive attachment to the syringe. The filter is 26 mm in diameter with a hold-up volume of 0.1 mL. Suitable for clear aqueous solutions not requiring preliminary filtration.

16596 HYK 26 mm 5.3 cm2 Minisart HY, sterile pack of 50, 0.2um PTFE membrane, MBS housing Minisart Syringe Filters Minisart syringe filters are ready-to-use filter units, offering high flow rates at low inlet pressures, to make rapid filtration of possible.

Order Numbers (0.2 um PTFE membrane, 1/8″ NPT threaded inlet/outlet) 17804-NPE Sterile packs of 12. 17804-NPG Sterile packs of 25 For smaller volume venting (e.g. ampoules) 16596 HYK 26 mm 5.3 cm2 Minisart HY, sterile pack of 50, 0.2um PTFE membrane, MBS housing

Minisart SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14 Can be used for sample preparation and sterile filtration Feature male spike outlets Individually packed and sterilized by autoclaving or ethylene oxide