Syringe filters are available in a range of sizes with different effective filtration areas (EFA). EFA is the filter area that is available for filtration. For a given membrane, the larger the filter area, the higher the flow rate and greater the throughput. Throughput is the amount of fluid able to pass through a filter prior to plugging.
The Acrodisc® syringe filter featuring a 0.2 µm PTFE membrane, prevents air bubble locks when filling sample vials. Purchase online - syringe filters with a filtration area of 1.0 cm², hold-up volume less than 14 µL and a 13 mm minispike outlet.
Filtration products by Merck. At Analytics-Shop you find a large selection of membrane filters and syringe filters by Merck Millipore. We offer a broad variety of different filter membranes of high quality, e.g. Merck Millipore millex syringe filters and ominpore or isopore membrane filters by Merck Millipore.
interchim uptidisc bio mec/gf 25mm 0.20um pp housing syringe filters P/N : U54630 Pack : 1 x 100 U. P/N : U54630 Item : U54630 Pack : 1 x 100 U.
1. Product Introduction. 1）Description. 0.22 micrometer filters are largely used in Analysis field for sample preparation, we provide 13mm, 25mm and 30mm diameter at your choice and multiple type of membranes(NY, PES, PTFE,PVDF,etc) available.
Membrane Filters; PTFE Membrane; Corning Disposable Vacuum Filtration System 0.22um PES / Qty 3 431098 1L & Qty 1 ... LAB EQUIPMENT Millex fg 50 0.2 mm filter ...
IC Millex Filters (Hydrophilic PTFE) Membrane 0.20 IC Millex-LG 10 mL <10 µL Male Luer slip 100 SLLGC13NL 0.45 IC Millex-LH 10 mL <10 µL Male Luer slip 100 SLLHC13NL Fluoropore (Hydrophobic PTFE) Membrane 0.20 FG 10 mL <25 µL Male Luer slip 100 SLFGX13NL Male Luer slip 1000 SLFGX13NK Tube outlet 100 SLFGX13TL
A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Comes in a pack of 50. MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the cartridges remove fragments that would otherwise
Syringe filter PVDF 33mm 0.45um Millex HV Durapore Sterile. The Millex® Filter Unit, designed for small-volume sterilization and clarification of pharmacy solutions. Like all Millipore filters, Millex units are built with quality in mind. Raw materials are carefully inspected before being used and stringent control is exercised over the
Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm. Background Information. Millex® syringe filter units with hydrophobic Fluoropore™ or Millipore Express® PLUS PES membrane are ideal for in-line sterilization of gases and venting sterile containers, and filters with Fluoropore™ membrane can also be used for sterilizing or clarifying organic
Achieve sales and support objectives within the authorized territory. Have the ability to provide local customer service and basic technical support services. If you're interested in promoting and selling Membrane Solutions products, please don't hesitate to contact us. Toll free: 1-866-528-4572. E-mail： info@membrane-solutions.com.
PTFE Syringe Filters. PTFE syringe filters are hydrophobic and chemically resistant to all solvents, acids, and bases. PTFE does not impart any extractables to the filtrate. It's an ideal material for transducer protectors because it blocks water vapor. PTFE is ideal for filtering and de-gassing chromatography solvents.
FILTER, SYRINGE PTFE 0.22UM 13MM (100/CS) Syringe Filter Millex™-GP Sterile with PES Membrane, 0.22µm Pore Size, 33 mm Diameter, 145 psi Pressure Rating.
Millex Syringe Filters Non Sterile We provide wide range of Millex Syringe filters that suits your application. Mixed Ester of Cellulose [MCE] Non-sterile. Millex MCE syringe filter is made up of hydrophilic mixed cellulose esters (MCE) membrane and is available in 0.22 µm, 0.45 µm and 0.80 µm pore sizes to suit your application needs.
