luer lock 0.2um ptfe syringe filter Minisart

Minisart Plus filtration unit, 0.2µm, with glass fibre pre-filter, non-sterile with male luer lock outlet, bulk wrapped. Minisart Syringe filter holders for rapid small volume sterilization, ready-to-use units, which offer high flow rates at low inlet pressures and make a correspondingly rapid sterile filtration possible. Fitted on a standard syringe, they enable a less hand-tiring []

Syringe Filter, PTFE, 25mm diameter, 0.2um, 100/pk (Scientific Strategies # FPT250020-100PK) Polytetrafluorethylene is used for the filtration of aggressive chemicals, including acids and non-aqueous solvents, as well as for GC and HPLC sample preparation. 25mm Diameter.

luer lock 0.22 um ptfe filter for food and beverage Orange PTFE (Hydrophobic) Syringe Filters, 0.22 µm, 30 mm (100 The PerkinElmer Orange PTFE (Hydrophobic) Syringe Filters, 0.22 μm, detection limit applications (such as food, beverage, or environmental analysis).

Sartorius - 16534--GUK 16534-GUK Minisart Cellulose Sartorius - 16534--GUK 16534-GUK Minisart Cellulose Acetate NML Syringe Filter, Sterile, Luer Lock Outlet, 0.2 um, 28 mm (Pack

Nov 01, 2021 · Oct 29, 2021 · Sep 28, 2021 · VWR 0.2 um ptfe syringe filter for hospitals-Voa Vial PTFE Membrane | 229757 • CELLTREAT Scientific PTFE Syringe Filter, 0.22μm, 30mm, Sterile • 229757 • Filters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives Female luer-lock inlet and male luer slip outlet Color coded by membrane type for easy identification

Minisart ® HY with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12. Type 1659A with a pore size of 1 µm can be used as particle and aerosol barrier. It has a male luer lock outlet. Version HYQ is a non-sterile bulk pack. Units can be sterilized by EO . Item no.: 1659A--------HYQ

Minisart® Syringe Filter, Polyethersulfone (PES), Pore Size 0.22 µm, Gamma irradiated, Female Luer Lock, Male Luer Lock, Pack Size 50 Added to Shopping Cart Minisart ® High Flow with polyethersulfone (PES) is optimal for highest flow rates and a pH of 3 - 12.

Minisart ® HY Standard syringe filter with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12. Type S6596 with a pore size of 0.2 µm can be used for sterile filtration of air/gas. It has a male luer lock outlet. Version Q is a non-sterile bulk pack. Units can be sterilized by EO .

Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Simple, rapid and reliable ultracleaning. Feature a coating-free, hydrophobic PTFE membrane that is chemically inert.

luer lock 0.2 um ptfe syringe filter for power generation Syringe Filters CA 13MM 0.45um Sterile Leur Lock STERILE YELLOW Syringe filter diameter 13 mm FLL/MLS Acrylic Yellow membrane Cellulose Acetate 0.45 µm GVS blst Sterile / PK 50 Product code FJ13ASCCA004FL01 Description Syringe filter diam.13 mm FLL/MLS Acrylic Yellow membr.CA 0.45 µm

Minisart® RC15 Syringe Filter 17761-----R, 0.2 µm Regenerated Cellulose. Minisart ® RC with hydrophilic regenerated cellulose (RC) is optimized for aqueous liquids and solvents with a pH of 3 - 14 and is stable against DMSO. Type 17761 with a pore size of 0.2 µm can be used for sample preparation and has a male luer slip outlet.

Minisart® SRP syringe filters with a clean and chemically inert PTFE membrane. The units are ready-to-use and allow for simple, rapid and reliable ultracleaning of small volume samples for HPLC or GC analysis, which require an even more chemical resistant unit than Minisart® RC, e.g. for solvents such as acetone, dimethylformamide and DMSO

Syringe filters – Luknova Luknova supplies a vari [] Luknova supplies a variety of high quality syringe filters (with female luer lock inlet and male slip outlet) for sample preparation and solvent filtration

luer lock 0.2um syringe filter for air Sterile Syringe Filters, PVDF, 0.2um, WITH Sterile Plastic 10 Pack Syringe Filter Sterile PES Hydrophilic Filtration 0.22um Pore Size, 33mm Membrane Diameter Sterile PES Membrane Individually Packed by Membrane Solutions 433 $14.99 $ 14 . 99 ($1.50/Count) Industrial & Scientific

Minisart filters pore size 0.2 μm | Sigma-Aldrich. Minisart filters have a Luer Lock inlet and outlet, for positive attachment to the syringe. The filter is 26 mm in diameter with a hold-up volume of 0.1 mL. Suitable for clear aqueous solutions not requiring preliminary filtration. Chat Now.