hydrophobic ptfe membrane filter 0.2um for petrochemicals

988 hydrophobic ptfe membrane filter products are offered for sale by suppliers on Alibaba.com, of which other lab supplies accounts for 6%, other industrial filtration equipment accounts for 5%, and water treatment accounts for 3%. A wide variety of hydrophobic ptfe membrane filter options are available to you, such as not available.

Our LifeASSURE™ PFS series PTFE Filter Cartridges use a hydrophobic polytetrafluoroethylene (PTFE) membrane, which helps minimize pore blockage from moisture in vent applications. Our filters are validated by a liquid bacterial challenge for complete retention based on the ASTM standard, which provides a high level of reliable sterilizing

Description. The 0.2 µm hydrophobic Aervent® polytetrafluoroethylene (PTFE) membrane provides sterility assurance, high flow rates and throughput. The Aervent® membrane contributes to clean processes due its non-fiber releasing properties. Hydrophobic Aervent® cartridge filters provide high throughput with minimal differential pressure.

An absolute-rated PVDF filter for pharmaceutical gases as well as fermentor air and sterile vent filtration – also ideal for filtering many low surface tension chemicals and solvents. The hydrophobic Steridyne ® polyvinylidene fluoride (PVDF) membrane filter is 0.2 µm absolute-rated for the sterile filtration of air and gases.

Sterilizing-grade Aervent® Filters Superior filters for the sterile filtration of gases The 0.2 µm hydrophobic Aervent polytetrafluoroethylene (PTFE) membrane provides sterility assurance high flow rates and throughput. The Aervent membrane contributes to clean processes due its non-fiber releasing properties. Benefits

PTFE Capsule 10" 0.8 + 0.2um Tc Connector Hydrophobic Membrane Capsule filter with sanitary tri-clamp fittings are widely used in pharmaceutical industries. Filter media available in PES,PTFE.PVDF,NYLON and Polypropylene.

Manufacturing Production Limits and Trends. In evaluating the bubble point distribution for sterilizing-grade (0.22 μm) hydrophilic membrane, our data have shown that our process yields a mean bubble point value of 55.5 psig (3830 mbarg), and the minimum bubble point production limit is 50 psig (3450 mbarg). These data, which cover over 50,000

Hydrophilic PTFE Membrane Filters. Advantec MFS. Filter both aqueous and organic solvents Optically clear when wet Hydrophilic PTFE membranes are a thin, unsupported, highly porous film that offers maximum chemical and pH resistance to a broad range of aqueous and organic solvents. This membrane exhibits high flow rates with minimal.

Individually packaged. 5. $276.10. 4250. Acro 50 Vent Filter 0.2um pore size. Reusable. 50mm hydrophobic PTFE membrane. Polypropylene housing. 60psi maximum operating pressure. Stepped hose barb connectors fit 6.4 to 12.7mm ID tubing. Autoclavable at 121 [degree]C. 20cm2 filtration area. 7.3dia.x8.2Lcm.

PTFE Membrane Filters, Aspire Laminated, Hydrophobic, Polypropylene Backer, 0.1-0.2 Micron, 200x250mm, 5/Pk Product code 0QL217200

Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high.

Difference between hydrophilic and hydrophobic filters. Hydrophilic filters are easily wet with water. Hydrophilic filters can be wetted with virtually any liquid, and are the preferred filters for aqueous solutions, as appropriate by compatibility. Once wetted, hydrophilic filters do not allow the free passage of gases until the applied

PTFE membranes are particularly suitable for preparing samples for HPLC analysis. The hydrophobic nature of the membrane also has applications for air and gas sterilization. The membrane is laminated onto a nonwoven polypropylene support web for improved strength and handling and can be used at temperatures up to 120ºC.

Minisart® SRP15 Syringe Filter 17573----------K, 0.2 µm hydrophobic PTFE. Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17573 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet.

1,889 0.2um ptfe membrane filter products are offered for sale by suppliers on Alibaba.com, of which other industrial filtration equipment accounts for 4%, water treatment accounts for 1%, and other lab supplies accounts for 1%. A wide variety of 0.2um ptfe membrane filter options are available to you, such as not available.