hydrophobic ptfe membrane filter 0.2um for chemicals

PTFE is a hydrophobic membrane, so it will repel water and is not suitable for the filtration of aqueous solutions. As well as being suitable for the filtration of organic solvents in applications such as HPLC and UHPLC sample preparation, the hydrophobic nature of the PTFE membrane makes these syringe filters ideal to use in gas filtration or

Sterilizing Grade 0.2 Micron PTFE Membrane Filter Cartridge. SERENE Hydrophobic PTFE Sterilizing Grade 0.2um filter cartridges are highly retentive hydrophobic membrane designed for critical liquid and gas sterilization. Hydrophobic PTFE filter medium provides exceptionally high air flow rates at low differential pressures Naturally Hydrophobic Membrane also provides high assurance of filter integrity andlong life, during high temperature venting application and during repeated steaming.

Designed for daily routine analysis. Fisherbrand™ Non-sterile PTFE Syringe Filter features a hydrophobic PTFE membrane for filtering HPLC organic solutions. Available in two membrane diameters (13 and 25mm) and two (0.2 and 0.45µm) pore sizes.

Description. Use Thermo Scientific™ Choice™ PTFE Hydrophobic Syringe Filters for filtration of aggressive organic, highly basic or hot solutions and as transducer protectors. They can filter aqueous solutions after pre-wetting with an alcohol. These syringe filters provide cleaner sample extracts by removing interfering materials and fine particles down to the rated pore size.

Features a hydrophobic Fluoropore™ (PTFE) membrane. Millex™-FG Syringe Filter, 0.20μm, Hydrophobic PTFE provides broad chemical compatibility and is ideal for filtering samples in organic solvents or to prevent back-streaming of atmospheric moisture in venting applications.

Our Fluoropore™ membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications. Fluoropore™ membranes provide broad chemical compatibility, high flow rates and consistency.

Hydrophilic PTFE Membrane Description •Maximal chemical and pH resistance •High flow rates with minimal aqueous extractables (<0.3wt%) •Optically clear when wet with water •Ideal for HPLC and other mixtures of aqueous and organic solvents Specifications Packaging Non-sterile Non-sterile Pore size (μm) 0.22 0.45 EtoH Bubble Point (MPa) 0.11 0.085 / 0.055 Water Flowrate

SERENE Hydrophobic PTFE Sterilizing Grade 0.2um filter CAPSULES are highly retentive hydrophobic membrane designed for critical liquid and gas sterilization. Hydrophobic PTFE filter medium provides exceptionally high air flow rates at low differential pressures Naturally Hydrophobic Membrane also provides high assurance of filter integrity and

China PP/Pet Support 0.22um 0.45 Micron Hydrophobic PTFE Filter Membrane for Air Filtration, Water Purification, Find details about China Membrane Filter, Filter Media from PP/Pet Support 0.22um 0.45 Micron Hydrophobic PTFE Filter Membrane for Air Filtration, Water Purification - JiAn City Qingfeng Filter Equipment Material Co., Ltd.

Features a hydrophobic Fluoropore™ (PTFE) membrane. Millex™-FG Syringe Filter, 0.20μm, Hydrophobic PTFE provides broad chemical compatibility and is ideal for filtering samples in organic solvents or to prevent back-streaming of atmospheric moisture in venting applications.

General description. Our Fluoropore® membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications. Fluoropore membranes provide broad chemical compatibility, high flow rates and consistency.

Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm. Background Information. Millex® syringe filter units with hydrophobic Fluoropore™ or Millipore Express® PLUS PES membrane are ideal for in-line sterilization of gases and venting sterile containers, and filters with Fluoropore™ membrane can also be used for sterilizing or clarifying organic

The membrane disc filters are available in Nylon or Hydrophobic PTFE with polypropylene support, in 0.2um or 0.45um pore sizes. The Nylon membrane has great chemical resistance, and is ideal for filtering more aggressive solutions such as alcohols and DMSO. The Hydrophobic PTFE membrane is bonded to a polypropylene support.

Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm A 50 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane. Comes in a pack of 10.; find Millipore-SLFG850 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich