hydrophobic ptfe 0.2 micron filter for chemicals

Sterilizing Grade 0.2 Micron PES Membrane Filter Cartridge. SERENE Hydrophobic PTFE Sterilizing Grade 0.2um filter CAPSULES are highly retentive hydrophobic membrane designed for critical liquid and gas sterilization. Hydrophobic PTFE filter medium provides exceptionally high air flow rates at low differential pressures Naturally Hydrophobic Membrane also provides high assurance of filter integrity and long life, during high temperature venting application and during repeated steaming.

Pall Acro 50 disposable filters are 0.2 micron rated and contain a Pall hydrophobic PTFE membrane and are ideal for the sterile venting of small containers and as an in-line gas filter. The large effective filter area provides high flow rates and filters can be autoclaved several times ensuring low costs.

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity. Added to Shopping Cart

Merck ptfe 0.2 micron filter for chemicals Whatman® membrane filters PTFE pore size 0.2 μm, Usual pore sizes are 0.2 μm and 0.5 μm. Sterile venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 μm membranes.

PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. PTFE is the membrane of choice for use with aggressive solvents, liquids, and gases that can attack other membranes. Chat Now.

0.2 Micron, PTFE Unlaminated Membrane Filters 0.2 Micron, PTFE Unlaminated Membrane Filters Our unsupported, hydrophobic, PTFE membrane filters are ideal for sterilization and venting applications involving air, gasses, and solvents/acids incompatible with most other filters.

Our filters are used for applications requiring 0.2 micron sterilization of air, gas, solvents and chemicals in life science industries. Validated PTFE Membrane Our LifeASSURE™ PFS series PTFE Filters use a hydrophobic polytetrafluoroethylene (PTFE) membrane, which helps minimize pore blockage from moisture in vent applications.

Buy 0.2 Micron Hydrophobic PTFE BTG PTFE Pleated Filter Cartridges For Air Filter Replacement Filtering Equipment Industrial directly with low price and high quality. sales@darllyfiltration.com 24/7 Support: +86 571-63210677

Sterilizing Grade 0.2 Micron PTFE Membrane Filter Cartridge. SERENE Hydrophobic PTFE Sterilizing Grade 0.2um filter cartridges are highly retentive hydrophobic membrane designed for critical liquid and gas sterilization. Hydrophobic PTFE filter medium provides exceptionally high air flow rates at low differential pressures Naturally Hydrophobic Membrane also provides high assurance of filter integrity andlong life, during high temperature venting application and during repeated steaming.

Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high.

Titan3 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 30 mm, with Pre-Filter, 100 Pk. Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Titan3 PTFE (Hydrophobic) Syringe Filter 0.45 µm, 4 mm, 100 Pk.

The 50 mm Millex® filter units are especially useful for vacuum line protection. All units are bi-directional. A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, ethylene oxide sterilized. Ideal for sterilizing gases, venting sterile containers, and sterilizing or clarifying organic solutions.

What is Hydrophobic PTFE Membrane 0.2 Micron Pleated Filters Cartridge Chemical Liquids and Gases Filters, Micro 03 manufacturers & suppliers on Video Channel of Made-in-China.com.

Oct 29, 2021 · Minisart® SRP25 Venting Filter 1757A-----Q, 0.2 µm hydrophobic PTFE. Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 1757A with a pore size of 0.2 µm can be used for sterile venting. It has hose barb outlet.

Key Features. Highly safe sterilization, ensuring 100% filter efficiency in humid environment during gas. filter, 0.2um filter rating in liquid, for gas filter, single layer: < Φ0.01μm; double layer: < 0.003μmΦ; Strong hydrophobicity, passing water intrusion test, avoiding residues due to the integrity of solvent wetting test;