hydrophobic 0.2um ptfe filter for venting

All units are bi-directional. A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, ethylene oxide sterilized. Ideal for sterilizing gases, venting sterile containers, and sterilizing or clarifying organic solutions.

The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single open-end cartridges. They are built to withstand demanding in situ steaming conditions in either the forward or reverse direction.

SERENE Hydrophobic PTFE Sterilizing Grade 0.2um filter cartridges are highly retentive hydrophobic membrane designed for critical liquid and gas sterilization. Hydrophobic PTFE filter medium provides exceptionally high air flow rates at low differential pressures Naturally Hydrophobic Membrane also provides high assurance of filter integrity andlong life, during high temperature venting application and during repeated steaming.

Description The 0.2 µm hydrophobic Aervent® polytetrafluoroethylene (PTFE) membrane provides sterility assurance, high flow rates and throughput. The Aervent® membrane contributes to clean processes due its non-fiber releasing properties. Hydrophobic Aervent® cartridge filters provide high throughput with minimal differential pressure.

Available in 50mm, Hydrophobic PTFE membrane, Non-sterile, 0.2µm pore sizes. Hydrophobic PTFE membrane is reinforced with polypropylene housing and features a stepped hosebarb. All materials comply with USP Class VI standards. Ideal for maintaining purified water stored in carboys, or for sterile venting during a slow exhaust/liquid autoclave

Foxx Life Sciences EZBio® HP Hydrophobic Vent Filters are used for hydrophobic venting and solvent filtration applications. Foxx Life Sciences EZBio® Vent Filters are used for hydrophobic venting and solvent filtration applications. The PTFE filter membrane is ideal for maintaining purified water stored in carboys, o

The 0.5 μm pore size is normally used. Air and gas sterilization make use of the hydrophobic characteristics of PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 μm and 0.5 μm. Sterile venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 μm membranes.

SERENE Hydrophobic PTFE Sterilizing Grade 0.2um filter CAPSULES are highly retentive hydrophobic membrane designed for critical liquid and gas sterilization. Hydrophobic PTFE filter medium provides exceptionally high air flow rates at low differential pressures Naturally Hydrophobic Membrane also provides high assurance of filter integrity and

Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm. Background Information. Millex® syringe filter units with hydrophobic Fluoropore™ or Millipore Express® PLUS PES membrane are ideal for in-line sterilization of gases and venting sterile containers, and filters with Fluoropore™ membrane can also be used for sterilizing or clarifying organic

Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, ethylene oxide sterilized.; find Millipore-SLFG025LS MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich

Minisart® SRP15 Syringe Filter 17558----------K, 0.2 µm hydrophobic PTFE. Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17558 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration and has a male spike outlet.

Whatman PolyVENT 16 Disc Filters, 0.2um PTFE, pack of 10Whatman 6713-1650 PolyVENT 16 Venting Filter Discs Membrane Stepped Barb Fittings, 3/8

Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high

Reusable Gas Venting Cap for Vertical Sidearm Flasks. steel headplates. The fittings are comprised of a PET insert with a fluorocarbon O-ring and a 45mm polypropylene sealing cap. Gas filters have 0.2 (u)m pore PTFE membranes. Stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules.